The FUJIFILM 42K Printbar System uses FUJIFILM Samba® printheads configured to meet customer needs. Most importantly, these systems encompass not only state-of-the-art printheads and inks, but they can also be provided with state of the art options such as automatic nozzle maintenance, splice avoidance, image compensation, a range of transports, inline mounting options, and drying technologies.
| Parameter | 42K | |
|---|---|---|
| Print width | Scalable to meet application needs in 1.6” increments | |
|
Printing resolution and speed Cross-process resolution is 1200 dpi for all options. |
300 FPM/91 MM - 1,200 dpi 550 FPM/168.5 MM - 600 dpi 700 FPM/213.3 MM - 400 dpi 920 FPM/280.4 MM - 300 dpi |
|
| Fluid handling | Aqueous dye inks Manual or automatic nozzle maintenance Bulk Ink container with level sensing |
|
| Color & quality | Monochrome C,M,Y,K (C,M,Y,K, to monochrome conversion) 2-Bit grayscale Native drop size 2.4 or 3.5 pL Max drop size 13pL Smallest font 2 pt (4 pt knockout) |
|
| Controller | Supports process color Supports printing concurrently on more than 2 webs at a time. Print queue management using Job Tickets and Hot Folders RIP-Stream; simultaneous RIP and print RIP-to-TIFFs; jobs are ripped in advance and saved as ready to print TIFFs Output synchronization for simplex or duplex printing Verifies up to the first ten pages before printing for items such as: separations, cut marks, barcodes, dimensions, and density |
|
| File format and Page data stream |
PDF (including ISO 32000-1 and 32000-2 PDF 2.0), PDF/VT *For legacy transaction data streams a third party conversion utility may be required |
|
| Interfaces |
Windows® 10 and PECS Includes five alignment points of adjustment to ensure optimal print quality over the web surface |
|
| Power | 208-240VAC, 1Phase, 50/60Hz, 20A Max for single printbar control 208-240VAC, 3Phase, 50/60Hz, 40A Max for multiple printbar control 110-240VAC, 1Ph, 50/60Hz, 30A Max for Ink Cabinet |
|
