The content on this page is intended to healthcare professionals and equivalents.
The FDR CROSS C-arm provides a single solution for Fluoroscopic imaging and static X-ray image acquisition. Its unique tilting tube head and removable detector design provide significantly greater freedom of imaging and efficiency compared to conventional configurations of a separate C-arm and mobile X-ray machine.
Use as a C-arm digital fluoroscopy system during surgery. Up to 17" x 17"FOV fluoroscopy mode.
For static X-ray image acquisition before, during and after surgery, the DR panel can be removed from the panel holder (separate DR panel can also be used).
The panel holder of the detector can be detached and DR panels in three sizes*1 can be used. Switch between different panel sizes to perform a wide range of surgical examinations and procedures.
- *1 FDR D-EVO III (brand name: DR-ID1800 Digital Radiography Device) only. Fluoroscopy mode can only be used for products in the FDR D-EVO III C series.
Choose different panel sizes to suit each area of the body - use the easy-to-rotate 10"x 12" size for limbs and the wide angle 14" x 17" or 17" x 17" size for the spine and hip joints.
Use the small 10" x 12" panel during surgeries, where imagining is more localized. Before and after surgeries, you can use the larger 17" × 17" panel to take images across a wider area.
*2 when using the 10"×12" panel
The compact, lightweight FDR CROSS weighs only 249 kg giving superior mobility in a busy operating room. Its integrated design and a C-arm aperture of 83 cm provides improved imaging and user experience.
Omni wheels at the front provide smooth all-round movements when positioning in small spaces. Dual side mounted brake pedals and wrap around handles enable smooth and secure control when moving
and stopping. This superior mobility is extremely helpful in operating rooms where equipment position constantly changes from procedure to procedure.
Omni wheels
The shapes of the handles are designed for easy maneuvering from both the front and the sides.
Control panels for the arm are located on both sides - operate the arm and magnetic lock from any position.
The built-in quick-charge lithium battery provides power for eight hours*3 of continuous use when fully charged, enabling a cable free workflow. A power cable can be connected when the battery is low or extended use is required.
- *3 Depends on usage conditions
The high-voltage cable is incorporated into the arm, allowing uncluttered movement and improved cleaning.
Wireless connection to the optional foot switch and monitor cart, removes the need for cable management and risk in the operating room. The monitor cart supports wireless HDMI, enabling two screens to be displayed with
no lag.
The control panel and hand switches where there is frequent contact are coated with Fujifilm's antibacterial Hydro Ag coating.
The C-arm can be moved up and down easily. Moving down the X-ray focal spot to less than 1 m helps to operate easily for lateral imaging.
DICOM connectivity provides the transfer of patient and examination information to RIS/PACS, including Dose SR enabling dose management information to be saved.
Product Name：FDR CROSS (Model number :DR-XD 3000)
