FDR D-EVO II C24

The content on this page is intended to healthcare professionals and equivalents.

Matching detector selection to the clinical requirement

The smaller form allows it to be smoothly linked with incubators.

A range of DR detectors are available. Multiple panels can be carried on the system simultaneously, allowing the user the flexibility to change techniques mid-round. Neonatal examinations in incubators are simplified by the use of the C24.
The rugged magnesium-alloy shell-type frame (SRM^*1) allows a total surface load capacity of 310 kg while maintaining a lightweight design of only 1.5 kg

*1 Shell-Shape with rib magnesium-alloy

The compact size can also be utilized in various fields, such as plastic surgery.

With a compact form factor of only 24 × 30 cm, the device can also be utilized in various fields, such as plastic surgery. It offers an increasing imaging efficiency and diagnostic precision extending beyond pediatrics.

Mobility and durability is suited to even the toughest medical settings

IPX6 waterproofing

Structured to prevent the infiltration of liquids, the device conforms to IPX6 and can withstand jets from any direction^*2. There is no need to worry that fluids such as blood or vomit could enter the device.

*2 Because of product characteristics, these effects cannot always be guaranteed into the future.

Allows detector-only image storage

The detector itself can store up to 200 images in internal memory. This eliminates the work of carrying around multiple CR cassettes found in conventional systems. Furthermore, it allows you to perform rapid imaging, such as at night or during an emergency.

Maximum 48 hours of standby time with the new sleep function

The sleep mode provides approx. 8 hours of standby time, whereas the newly added extra sleep mode provides up to 48 hours of standby time. In sleep mode, the center LED on the side of the detector flashes slowly to indicate the detector status at a glance.

Fujifilm's exclusive technology for achieving High Quality Images

ISS System reading technology

Equipped with an indirect conversion system called ISS method which bonds optical sensors (TFT) to the X-ray irradiation side unlike traditional flat detector displays. This greatly suppresses scattering and attenuation of X-ray signals, creating a sharp image with low X-ray dose. By applying flexible film to device detector, FDR D-EVO II has achieved DQE 54% (CsI scintillator), 31% (GOS scintillator) (1Lp/mm-RQA5 1mR)

Conventional method

ISS system reading technology

Fujifilm noise reduction circuit improves detector sensitivity in high absorption regions

The uniquely developed noise reduction circuit reduces noise in the image. In particular, granularity of low-concentration regions such as the heart and mediastinum is dramatically improved.

Advanced Image Processing

FUJIFILM has over 30 year’s experience the invention of the world’s first CR system in defining the latest technology to provide optimized X-ray imaging.
Simpler, more efficient with improved workflow for the radiographer our advanced image processing provides higher diagnostic value with reduced impact for the patients.

Compatible with Console Advance, employing advanced image processing technology to provide optimized X-ray image

Simpler, more efficient with improved workflow for the Radiographer, our advanced image processing high quality image with reduced impact for the patients.

Virtual Grid

Grid like Image quality without using a grid

* Optional

Virtual Grid is an image processing software that corrects for the effects of scatter radiation that otherwise reduce image contrast and clarity. Without the need for an anti-scatter grid, this software quickly predicts and then corrects for the effects of scattered radiation...
creating high quality images.

Dynamic Visualization II

* Optional

Advanced recognition algorithms automatically adjust contrast and density for individual body parts based on calculation of estimated 3D image data.

Pursuing ease of use through versatile functionality

1. Five-colored side-center LEDs to improve distinguishability

Equipped with LEDs at the center of each of the four sides of the detector that makes it easy to check the center position during imaging. Select from five colors (blue, pink, orange, lime-yellow, and purple) that make it easier to distinguish devices when using multiple detectors. In sleep mode, the side-center LEDs switch to a gentle flashing pattern that allows you to see the state of the detector at a glance.

2. Works together with the console to display the detector status

The docking stand works together with the console to display the detector's “Ready” status and identify color using the LEDs. This makes it easy to check the current state of the detector even from far away.

3. Easy-to-see LED status display

The back of the detector is equipped with an LED lamp that displays remaining battery status. This allows easy checks of remaining battery, and eliminates worries when using the detector.

4. Docking stand for charging and storage

The docking stand functions as a charger and storage device, and enables high-speed full charging in approximately 4 hours.

5. Stylish, unified design

The detector and peripherals (docking stand, charger, power supply unit) all share the same silver base color and high-quality design that effectively utilizes curved edges.

6. "SmartSwitch" Technology

The “SmartSwitch” technology allows automatic X-ray detection.
With “SmartSwitch,” the FDR D-EVO II” no longer requires connection between the X-ray generator and DR to automatically detect the X-ray exposure and begin image acquisition.

Products Name : FDR D-EVO II（Model name : DR-ID 1200)

* Fujifilm makes no representation that products on this website are commercially available in all countries.
* Approved uses of products vary by country and region.
* Specifications and appearance of products are subject to change without notice.

The instructions for use of "Accessories of FDR D-EVO II" are provided in electronic form by PDF format. Please access the following address and find this product page.

https://med-lib.fujifilm.com/