Processing capacity | Print sizes | Paper Widths | Printing speed |
---|---|---|---|
89 × 127 mm (3.5" × 5") | 127 mm (5”) | Approx. 2,250 prints/hr | |
102 x 152 mm (4" × 6") | 152 mm (6”) | Approx. 2,120 prints/hr | |
305 x 457 mm (12" × 18") | 305 mm (12") | Approx. 290 prints/hr | |
Print sizes | 82.5 mm (3.2") × 82.5 mm (3.2") - 305 mm (12") × 914.4 mm (36") | ||
Processing chemicals | Chemical system CP-49E | ||
Footprint space | Approx. 1.4 m2 (Dual magazine, with 152 mm print sorter attached) |
- Type
Floor-type, normal light operation (laser printer, processor, cutter and sorter in one unit)
- Exposure system
Scanning exposure system using RGB lasers
- Paper magazines
Dual magazine system (standard) / Triple magazine system (factory option) / Quad magazine system (factory option)
- Paper
FUJICOLOR Paper (silver-halide)
- Paper widths
82.5 / 89 / 102 / 114 / 117 / 120 / 127 / 130 / 152 / 165 / 178 / 203 / 210 / 216 / 240 / 254 / 279 / 305 mm
(3.2" / 3.5" / 4" / 4.5" / 4.6" / 4.7" / 5" / 5.1" / 6" / 6.5" / 7", 8" / 8.3" / 8.5" / 9.4" / 10" / 11" / 12")- Back printing
Two lines of 14-120 characters for backside printing of information
- Printer sorter
17 orders:Supports 152 mm (6" ) width (50 prints of 152 x 102 mm (6" × 4") / tray)
Supports order interrupt signal lamp*114 orders:Supports 152 mm (6" ) width (82 prints of 152 x 102 mm (6" × 4") / tray)
Supports order interrupt signal lamp*18 orders:Supports 254 mm (10") width
Does not support order interrupt signal lamp*1- Printer condition setup
Semi-automatic calibration by built-in calibrator
- Processing time
Dry-to-dry: 1 min. 42 sec.
- Power requirements
AC 200-240V 1 P2W or 3P3W / AC 346-415V 3P4W
- Dimensions
[Dual magazine, with 152 mm print sorter attached] 1,660 (W) × 953 (D) × 1,375 (H) mm
- Weights*1
Printer:Approx. 281.5 kg (620.6 lbs)
Processor:Approx. 323.2 kg (712.5 lbs)
Total:Approx. 604.7 kg (1,333.1 lbs)
With 152 mm print sorter attached