FDR D-EVO III G80i - Overview

Light, Easy Positioning, Fast Exams

The content on this page is intended to healthcare professionals and equivalents.

Simplify workflow with lightweight, wireless portability and single exposure long length views.

Single exposure and easy positioning

FDR D-EVO III G80i's 16.7"×31.8" field of view simplifies positioning for a variety of patient and anatomy sizes.

Workflow is enhanced by capturing the entire whole spine and other long views in a single exposure. Instant capture reduces chances for patient motion artifacts and retakes compared to multi exposure DR imaging.

Excellent Mobility

Lightweight, thin design allows easy handling and positioning. 
It designed lighter, more rugged, and less likely to get dropped. 
It can even utilize existing long- view CR cassette holders and stands. Its light portability and wireless battery operation also makes it easy to carry and move from room to room on demand.

Flexibility for OR and ER

The long wide field of view simplifies trauma imaging in the ER. Wireless connectivity to the console eliminates cords for safer, easier workflow in tight OR and ER environments.

ISS capture technology promotes high sensitivity

Fujifilm’s Irradiated Side Sampling (ISS) technology positions its capture electronics (TFTs) at the irradiation side, in contrast to traditional TFT detector detectors. This design significantly suppresses scattering and attenuation of X-ray signals, improving efficiency to produce sharper images at lower doses compared to traditional designs and achieve DQE of 31% (1 Lp/mm, 1 mR).

Conventional method

ISS system reading technology

High-Level Protection

Fluid Protection

Smooth, sealed design proved IPX3*1 protection rating.
Ensures reliability and protection from body fluid accidents.

  • *1 Full rating cannot be guaranteed long term due mechanical characteristics, care and handling.

High durability with lightweight

FDR D-EVO III G80i requires higher durability
against localized deformation and bending, as it is approximately twice the size of a conventional  17"×17" detector. The rib spacer is optimized based on load simulations to achieve both lightweight and durability*2.

  • *2 40kg at 40mm
  • *2 For maximum protection, protective cover is available. (Withstand load of 310kg)

Hydro Ag antibacterial coating

The FDR D-EVO III detectors are coated with Hydro Ag antibacterial coating, which has an antibacterial effect 100 times greater than that of conventional Ag coatings. This longer-lasting higher intensity antibacterial effect prevents bacterial growth. A hyper-hydrophilic binder allows easy cleaning and hygienic use, together with the easy-to wipe flat design of the detector.

  • * Due to the characteristics of the product, the effect is not guaranteed in the future.

Versatile Functionality

LED indicators provide easy visualization for positioning guidance and device status information at a glance, even from a distance

  1. Equipped with side-center LEDs on four sides of the detector, for easier positioning of the device during imaging. There are five LED colors (blue, pink, orange, lime-yellow and purple), to distinguish different devices for different colors when using multiple devices. 
  2. Exposure ready light turns green when ready to capture an image.
  3. White LEDs identify the top-side and bottom-side of the detector.

Internal memory for independent imaging Easy-to-read battery status display

Up to 100 images can be stored in the panel’s internal memory. The LED display shows the number of stored images along with the battery status. You can check that information even when the panel is being used on its own.

Easy-to-read battery status display

LED battery level indicator provides easy visibility of battery status at a glance.

Improved Handling

Expanded wireless for high-speed spectrum’s

FDR D-EVO III G80i supports IEEE 802.11n, IEEE 802.11ac, the high-speed wireless LAN. And is compatible with 2.4GHz and 5GHz (W52/53/56/58) making it suitable for outdoor use.

Improved throughput

Image display and cycle times are ~2.5 seconds faster than prior models with wireless LAN to further speed procedure times.

Simplified portability

A dedicated wireless access point for detector to console communication is no longer needed. Remote imaging can be performed with just panel and console (or mobile console).

“SmartSwitch” Technology

Fujifilm's "SmartSwitch” technology enables automatic X-ray detection, eliminating the need for a wired connection to the X-ray generator. This allows image capture with any x-ray source on demand and simplifying use with other rooms or mobiles.

Easy sharing between systems

FDR D-EVO III G80i enables users to select and switch between systems simply by pressing the button on the back of the panel.

*3 Console Advance

Advanced image processing

delivers high resolution at very low patient dose

  • * Image processing is achieved through the Console Advance.

Virtual Grid

Provides a high quality image using a grid

Virtual Grid processing corrects for the effects of scatter radiation. Without the need for a grid, Virtual Grid retains high contrast and image sharpness, while preventing the asymmetric density  resulting from misalignment of X-ray tube and detector.  (Option)

Dynamic Visualization II

Optimizes image quality with intelligent 3D feature and exposure data recognition technology

Advanced thickness and feature recognition algorithms automatically adjust contrast and density for individual characteristics of body parts and orthopedic hardware. (Option)

FDR D-EVO III G80i with EX-Mobile connect with AI-CAD Software

EX-Mobile*4 is a compact, lightweight optional accessory that provides the operating environment to install the software such as AI-CAD software*5 at the technologist console to display the analysis result in images received from AI-CAD. The console display is not for diagnosis purpose, it enables users to see the analysis result and send it to PACS.

  • *4 Use of EX-Mobile functionality requires images to be trimmed to 17 × 17 inch size or less.
  • *5 AI-CAD software applications vary and are sold separately from EX-Mobile.

FDR D-EVO III series

Available combinations.

Options

MP box(DR-ID 1200MP)

Power-Box(DR-ID 1200PB)

Battery charger(Li-ion Battery charger)

Battery Pack(Li-ion Battery [125Y200038])

Battery Pack S(Li-ion Battery [125Y200055])

Protective cover

Product Name:FDR D-EVO III (Model number : DR-ID 1800)