Canada
 J Press 1160CFG

J Press 1160CFG

Full Color High-speed Continuous Feed Inkjet Printing System

Basic Specifications / Print Function

Printer configuration

Twin Engine Duplex

Color capability

Full Color

Printing method

Piezoelectric drop-on-demand inkjet method

Printing resolution

Image Quality Priority : 1,200 x 1,200 dpi
Speed Priority : 1,200 x 600 dpi

Halftone

3 levels per drop

Warm-up time*1

15 minutes or less (when the room temperature at 73.4°F (23°C)

Continuous print speed

Image Quality Priority : 262 ft./min (80 m/min)
Speed Priority : 520ft./min (160 m/min)

Paper size*3

Width 6 - 20.5 in. (152.4 mm - 520.7 mm)

Paper weight*4

64 to 250 gsm

Paper feed

Unwinder connected (maximum roll diameter: 50 in. (1,270 mm))

Paper discharge

Rewinder*5 connected (maximum roll diameter: 50 in. (1,270 mm))

Feeding speed

Maximum 520 ft./min (160 m/min)

Operating Noise*6

In operation: 79 dB(A)

Input power supply

Three-phase AC200 V +/-10 %, 50/60 Hz common, Power Capacity: 87 kVA (Printer)
Three-phase AC400 V +/-10 %, 50/60 Hz common, Power Capacity: 208 kVA (Printer)
Three-phase AC200 V +/-10 %, 50/60 Hz common, Power Capacity: 26 kVA (Paper Stabilizer)
Three-phase AC400 V +/-10 %, 50/60 Hz common, Power Capacity: 104 kVA (Paper Stabilizer)

Dimensions (W X H X D)*7

437 in. x 93.7 in. x 171.5 in. (11,100 mm x 2,380 mm x 4,355 mm) (With rewinder)
406 in. x 93.7 in. x 171.5 in. (10,300 mm x 2,380 mm x 4,355 mm) (With slack web unit. Without rewinder)

Installation space (W X D)*7

594 in. x 248 in. (15,100 mm x 6,300 mm) (With rewinder)
563 in. x 248 in. (14,300 mm x 6,300 mm) (With slack web unit. Without rewinder)

Weight*7

28,890 lbs. (13,105 kg) (With rewinder)
27,680 lbs. (12,555 kg) (With slack web unit. Without rewinder)

  • *1 Start-up inspection time and purge time are excluded. It may take more than 15 minutes depending on the installation environment.
  • *2 A4 size page x 2 layout and duplex printing. When printing a single document continuously. The continuous print speed may decrease due to conditions such as output data.
  • *3 A margin of 0.591 in. (15 mm) on left and right edges of paper is the unprintable area when the Gripper Roller is set on the edge area of the paper.
  • *4 It is restricted on printing speed with the paper over 157 gsm.
  • *5 Optional.
  • *6 Measurement based on the ISO11204 standard.
  • *7 Unwinder (standard), rewinder (optional), slack web unit and other necessary units are connected. Excludes roll paper (feed/rewind), attention light and chiller. Includes inks.

Print Server [Print Server for the J Press 1160CFG]

Type

External

CPU

[Center Processor] Intel® Xeon® E-2276G Processor 3.8 GHz
[Back End Processor] Intel® Xeon® Gold 6230 Processor 2.1 GHz x 4

Storage device

[Center Processor] HDD: 1 TB x 2 + 2 TB x 1, DVD-ROM drive
[Back End Processor] HDD: 1 TB x 6, SSD: 1.6 TB x 14, 800 GB x 8, DVD-ROM drive

Memory capacity

[Center Processor] 32 GB (Max 32 GB)
[Back End Processor] 384 GB (Max 384 GB)

Server operation system

[Center Processor] Windows Server IoT 2022 Standard
[Back End Processor] Windows Server IoT 2022 Standard

Page description language

Adobe® PostScript® 3TM, PDF/VT-1, PDF/VT-2, PPML

Print data format

PS, PDF2.0, PDF/X-1a, PDF/X-3, PDF/X-4, PDF/X-5, EPS, TIFF, JPEG

Interface

Ethernet 1000BASE-T / 100BASE-TX / 10BASE-T

Network protocol

TCP/IP (lpr, FTP, SMB)

Input power supply

[Centre Processor] AC100-240V+/-10 %, 50/60 Hz common, Power Capacity: 0.25 kVA
[Back End Processor] AC200-240 V+/-10 %, 50/60 Hz common, Power Capacity: 6.4 kVA (3.2 kVA x 2)

Dimensions (W X H X D)

[Center Processor] 3.86 in. x 13.4 in. x 16 in. (98 mm x 340 mm x 400 mm)
[Back End Processor] 28 in. x 80 in. x 41.3 in. (700 mm x 2,000 mm x 1,050 mm)

Weight

[Center Processor] 24.64 lbs. (11 kg)*8
[Back End Processor] 660 lbs. (300 kg)*9

Note: This Print Server is configured with Center Processor and Back End Processor.

  • *8 Excludes monitor, mouse and keyboard.
  • *9 Includes console monitor, mouse, keyboard and touch pad.
  1. To comply with paper weight specifications, it is recommended to use our recommended paper.
    Document may not be printed correctly depending on usage conditions.
  2. Functional spare parts will be available for at least 7 years after the product is no longer manufactured.