Mini 4300 Series Industrial Inkjet Printbar System: Optional Accessories

Optional Accessories

Head Mount LED Lamp Aqueous Dryer Roll-to-Roll Rewinder

Head Mount

The Mini 4300 Head Mount is designed to provide an integration solution between the printbar and a transport system, while providing 5 axes of adjustment for high image quality results.

Material: Stainless steel, aluminum
Weight: Approximately 11 kg [25 lbs.]
Mounting holes: M8 x 1.25 thread, 25.4 x 25.4 square hole pattern
Yaw adjustment: ± 3 degrees
Roll adjustment: ± 2.5 degrees
Pitch adjustment: ± 2 degrees
Standoff adjustment: 19 mm [0.75 in.]
Horizontal coarse adjustment: 320 mm [12.6 in.] max
Horizontal fine adjustment: 9 mm [ 0.35 in.]

LED Lamp

The LED lamp is used for UV/LED curable inks. Results may vary.

Size: 77 x 90 x 231.3 mm [3 x 3.5 x 9 in.]
Weight: 1.82 kg [2.2 lbs.]
Standoff distance: 2 mm [0.08 in.]
Noise: 54dbA @ 1 m [3.3 ft.]
Max operating temp: 35°C [ 95°F]
Input power: 120V
Input signal: Analogue or RS485

Aqueous Dryer

The Aqueous dryer is used for aqueous inks, organic solvents and latex. Results may vary.

Lamp size: 362/508 x 22/67 x 237 mm [14.2/20 x 0.9/2.6 x 9.3 in.]
Drying width: 44 mm [1.7 in.]
Lamp weight: 1.7 kg [3.7 lbs.]
Lamp power: Up to 3.1kW emitter
PSU input power: 230VAC, 14A, 50/60 Hz*
PSU weight: 2 kg [4.4 lbs.]
PSU size: 128 x 250 x 60 mm [5 x 9.8 x 2.4 in.]
Mount height adjustment: 60 mm [2.4 in.]
Mount flip-up angle: 45° and 90°
Mounting holes: M8, 100 mm [3.9 in.] width

Size: 1092.2 x 457.2 x 508 mm [43 x 18 x 20 in.]
Weight: 113.4 KG [250 lbs.]
Max substrate roll diameter: 304.8 mm [12 in.]
Max substrate roll width: 152.4 mm [6 in.]
Substrate roll core diameter: 76.2 mm [3 in.]
Core locking: Manual
Speed: 10.7 – 152.4 meters per minute [35 – 500 feet per minute]
Unit control: Manual through local HMI touch screen
Auto tension control: Yes
Tension control method: Pneumatic brake
Substrate break detection: Yes
End of substrate notification: Yes
E-stop: Yes
Encoder mounting bracket: Yes
Mounting plate: M8 x 1.25 thread, 25.4 x 25.4 mm square pattern
Substrate elevation: Even with top mounting plate
Input power: 230 VAC, Single phase, 50/60 Hz

Mini 4300 Series Industrial Inkjet Printbar System

Optional Accessories

Head Mount

LED Lamp

Aqueous Dryer

Related Products