Acuity Ultra R2: Specification | Fujifilm [Australia]

Technical specification

Acuity Ultra R2	3200 series	5000 series
Model	3206: CMYK LcLm 3208W: CMYK LcLmWW 3244: CMYK CMYK	5006: CMYK LcLm 5008W: CMYK LcLmWW 5044: CMYK CMYK
Printhead drop volume	Greyscale, 3.5 pl – 14 pl
Printing technology	Piezoelectric drop-on-demand inkjet
Resolution	Up to 1200 x 1200 dpi
Inks	3206, 3208W, 5006, 5008W: Uvijet AU series 3244, 5044: Uvijet GS series
Curing system	3206, 3208W, 5006, 5008W: LED 3244, 5044: UV
Maximum throughput	265 m²/hr	400 m²/hr
Maximum media width	3.40 m	5.13 m
Maximum media thickness	2.0 mm	2.0 mm
Minimum media thickness	0.1 mm	0.1 mm
Maximum print image width	3.20 m	5.00 m
Media loading capabilities	Large rolls: 400kg x 400mm Multi-rolls: 2 x 200kg x 340mm	Large rolls: 600kg x 400mm Multi-rolls: 3 x 200kg x 340mm
RIP	Caldera, ColorGATE
Hardware interface	Ethernet TCP/IP, 1000 base-T
Power requirements	3 phase, 400V AC, 50 Hz, 30A Power consumption: LED 15kW, UV 21 kW
Compressed air	Pressure (minimum): 8 kg/cm² (7.85 bar / 114 psi) Flow rate (minimum): 1.2 m³/min (1200 l/min / 42.26 cfm)
Environmental conditions	Temperature: 18˚C – 28˚C Humidity: 40% – 80% RH (non-condensing) Atmospheric dust: ≤0.15 mg/m³
Dimensions (L x W x H) (excluding workstation)	6.81 m x 1.81 m x 2.04 m	8.5 m x 1.88 m x 2.21 m
Machine weight	4750 kg	7740 kg

Acuity Ultra R2 - Specification