In order to provide you with a better browsing experience and to improve our site functionality, we use cookies and other tracking technologies. Detailed information on the use of cookies on our site and how to opt out is provided in our Cookie Policy. By clicking into any content on this site, you consent that we can store and access cookies and other tracking technologies as described in our Cookie Policy.
Vietnam

instax Link WIDE - Specifications

NEW
Special Site Support
Front
  1. Film ejection slot
  2. Power button/LED
  3. Strap holes
Bottom
  1. Reset button*1
  2. Micro USB port
Rear
  1. Film door lock
  2. Film door
  • *1 If the printer does not work properly, press the reset button to reset the printer.
Specifications
Recording method

3-color exposure with OLED

Film used

FUJIFILM instax WIDE Instant Film (sold separately)

Number of films

10 films/pack

Image size

62 mm × 99 mm

Supported image size

800 × 1260 dots

Printing resolution

12.5 dots/mm (318 dpi, 80 μm dot pitch)

Printing levels

256 levels per color (RGB)

Interface

Standard compliance: Bluetooth Ver. 4.2 (BLE)

Supported image format

JPEG, PNG, HEIF, DNG

Printing time

Image recording - photo output (fed out): Approximately 12 sec.

Approximate printing capacity

Approximately 100 prints (from full charge)

  • * The number of prints depends on the usage conditions.
Power supply

Lithium ion battery (internal type: not removable)

Charging time

Approximately 80 to 120 minutes (Charging time depends on the temperature and battery remaining level)

Power consumption

Approximately 3 W

Operating environment

Temperature: +5 ºC to +40 ºC Humidity: 20% to 80% (no condensation)

Main unit dimensions

139 mm × 127.5 mm × 33.7 mm (excluding projecting parts)

Main unit mass

Approximately 340 g (excluding film pack)

Supplied accessory

USB cable (BOD700-101, Length: 30 cm) , Stand (1) , Strap (1)

  • Simulated Image. Development time approx. 90 sec.
  • The instax prints depicted are for illustrative purposes only.
  • The above specifications are subject to change for performance improvement.
  • The colors of actual products might differ somewhat from products in the catalog due to the nature of printing.
  • The Bluetooth® wordmark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by FUJIFILM Corporation is under license.
  • The text QR code is a registered trademark and wordmark of Denso Wave Incorporated.
  • The image size may affect sharpness and graininess of the finished print.
  • Depending on the file size and smartphone type, wireless communication may take a long time.
  • The smartphone type and shooting condition may affect the color tone and quality of the finished print.
  • The finished print may look different from the image viewed on the smartphone display.
  • The smartphone screen images are simulated.
  • QR code depicted is for illustrative purposes only.
Special Site
Support