The content on this page is intended to healthcare professionals and equivalents.
- Standard Components
FCR PRIMA T Image Reader (Model: CR-IR 392)
AC power cord
- Other System Components
Imaging Plate ST-VI:
35×43cm (14”×17”), 35×35cm (14”×14”), 10”×12”, 8”×10”, 24×30cm, 18×24cm, 15×30cm (Variation)IP Cassette Type CC:
35×43cm (14”×17”), 35×35cm (14”×14”), 10”×12”, 8”×10”, 24×30cm, 18×24cm, 15×30cm (Variation)- Time Required for IP Feed/Load
Min. 64 sec. (Min. 54 sec.)*1
- Processing Capacity
Up to 57 IPs/ hr. (Up to 67 IPs/hr.)*1
- Reading Specification
10 pixels /mm, 5 pixels/mm*2
- Time to Start on Display
Min. 33 sec.
- Time to Print on DRYPIX PRIMA
Approx. 165 sec. (Approx. 155 sec.)*2 in case of 35×43cm
- Number of Stacker
1
- Network
10 Base T/100 Base TX
- Dimensions (W×D×H)
560×540×392mm (22”×21”×15”)
- Weight
39kg (86lbs.)
- Power Supply Conditions
Single phase 50-60Hz
AC120-240V ±10% 1.9A (max)
- Environmental Conditions
Operating Conditions:
- Temperature: 15-30C
- Humidity: 15-80%RH (No dew condensation)
- Atmospheric pressure: 750-1060hPa
This equipment is a Class 1 laser product (IEC60825).
- *1 When using the Upgrade Kit
- *2 When using the Upgrade Kit and in the High Speed mode