- Film ejection slot
- Function button
- Power button/LED
- USB port cover
- USB Type-C port
- Reset button*1
- Film door lock
- Film door
- *1 If the printer does not work properly, press the reset button to reset the printer.
- Recording method
3-color exposure with OLED
- Film used
FUJIFILM instax SQUARE instant film (sold separately)
- Number of films
10 films/pack
- Image size
62 mm × 62 mm
- Exposure pixel count
800 × 800 dots
- Exposure resolution
12.5 dots/mm (318 dpi, 80 μm dot pitch)
- Exposure gradation
RGB gradation of 256 colors
- Interface
Bluetooth Ver. 4.2 (BLE)
- Printable image format
JPEG、PNG、HEIF、DNG
- Printing time
Image recording - photo output (fed out): Approximately 12 sec.
- Possible number of printed images
Approximately 100 (from full charge; number of prints depends on usage conditions)
- Power supply
Lithium ion battery (internal type: not removable)
- Charging time
Approximately 80 to 120 minutes (depending upon environment temperature at time of charging)
- Power consumption
Approximately 3 W
- Operating environment
Temperature: +5 ºC to +40 ºC Humidity: 20% to 80% (no condensation)
- Main unit dimensions
105 mm × 37.5 mm × 127.5 mm (excluding projecting parts)
- Main unit mass Approximately
236 g (excluding film pack)
- Supplied accessory
USB cable ( Type-C, Length: 30 cm )
- * The above specifications are subject to change for performance improvement.
- * Image size may affect print finish (sharpness, grain, etc.).
- * Time required for wireless communication may be affected by file size, smartphone model, etc.
- * Print finish (color, image quality, etc.) may be affected by smartphone model, shooting conditions, etc.
- * Actual print finish may differ from the image displayed on the LCD screen of your smartphone.