instax mini Link 3™ Specifications | Fujifilm [United States]

Front

*1 If the printer does not work properly, press the Reset button to reset the printer.
*2 Printer uses INSTAX MINI instant film only (film sold separately).

Recording method: 3-color exposure with OLED
Film used: FUJIFILM INSTAX MINI Instant Film (sold separately)
Image size: 62 mm × 46 mm
Exposure pixel count: 800 × 600 dots
Exposure resolution: 12.5 dots/mm (318 dpi, 80 μm dot pitch)
Exposure gradation: RGB gradation of 256 colors
Interface: Bluetooth Ver. 5.1
Printable image format: JPEG, PNG, HEIF, DNG
Printing time: Approximately 15 sec.
Possible number of printed images: Approximately 100 (from full charge; number of prints depends on the usage conditions.)
Power supply: Lithium-ion battery (internal type: not removable)
Charging time: Approximately 1.5 to 2.0 hours (depending upon environment temperature at time of charging)
Power consumption: Approximately 3 W
Operating environment: "Temperature: +5°C to +40°C Humidity: 20% to 80% (no condensation)"
Dimensions: 90.0 mm × 37.3 mm × 125.0 mm (excluding projecting parts)
Weight: 210 g (excluding film cartridge)
Supplied accessory: USB Type-C cable (FZ00013220, Length: 30 cm)

* Images of instax photo are for illustrative purposes only.
* The above specifications are subject to change for performance improvement.
* Image size may affect print finish (sharpness, grain, etc.).
* Time required for wireless communication may be affected by file size, smartphone model, etc.
* Print finish (color, image quality, etc.) may be affected by smartphone model, shooting conditions, etc.
* Actual print finish may differ from the image displayed on the LCD screen of your smartphone.
* Smartphone screen images are superimposed.
* The Bluetooth® word mark and logo are registered trademarks of Bluetooth SIG, Inc. and FUJIFILM Corporation uses these under license.
* QR code is a registered trademark of DENSO WAVE INCORPORATED.