Optional
Feeding Options
Bypass Tray (Standard)*1
- 52 to 350 gsm
- 250 sheets
- 1300 mm Long paper*2
Multi Sheet Inserter for Banner Print*1
- 52 to 350 gsm
- 250 sheets
- 1300 mm Long Paper*2
- 660 mm Long Paper*3
- 52 to 350 gsm
- 2000 sheets × 2-tray
- Air Assist
- Multi-feed Detection
- 52 to 300 gsm
- 2000 sheets × 1-tray
- Cabinet
- Air Assist
- Multi-feed Detection
- *1 Installed directly to the printer, or installed on the top of High Capacity Feeder C3-DS or B1-S. Paper weight up to 300 gsm is supported when installed on the top of High Capacity Feeder C3-DS or B1-S.
- *2 When installed directly on the printer unit.
- *3 When installed on the top of High Capacity Feeder C3-DS or B1-S.
- * Supported paper weight for long paper is 52 to 220 gsm.
Output Options
1. Interface Decurler Module D1
- Real Time Curl Correction
- (3 Levels Upward / Off / 3 Levels Downward)
2. Inserter D1
- Cover / Sheet Insertion
3. High Capacity Stacker A1
- 5000-sheet Stacking
- Stacker Cart
- Long Paper Stacking*4
4. Crease / Two-sided Trimmer D2
- Two-Sided Trim
- Crease
5. Folder Unit CD2
- Z Fold Half Sheet / Tri-Fold
6. Finisher D6 / Finisher D6 with Booklet Maker
- Sort / Stack
- Staple (100 sheets)
- Punch*4
- Saddle Staple (30 sheets) / Single Fold*5
- Long Paper Stacking*4
7. Square Back Trimmer D1
- Face Trim
- Square Back
Space-saving Finisher D6 with a slim type connection module
- Real Time Curl Correction (Upward/Off/Downward)
- Slim Connection Module
* When using [8.], the output options that can be connected are [5.] and [6.] only. Other output options that can be connected with Finisher D6 / Finisher D6 with Booklet Maker cannot be connected.
Finisher-C4 fits into the office space
9. Folder Unit CD3
- Z Fold Half Sheet / Tri-Fold
10. Finisher-C4
- Sort / Stack
- Staple (50 sheets / 65 sheets*4)
- Staple-free Staple (10 sheets)
- Punch*4
- Saddle Staple (20 sheets) / Single Fold
- *4 Optional.
- *5 For Finisher D6 with Booklet Maker.
- * Simple Catch Tray / Offset Catch Tray / Long Catch Tray are available if post-processing is not required.
Finishing Applications
Cover / Sheet Insertion
Punch
Side Stitch
Saddle Staple
Single Fold
Z Fold Half Sheet
Tri-Fold
Crease
Face Trim
Two-Sided Trim
Full Bleed Trim
Square Back
