Basic Specifications / Print Function
- Printer configuration
Twin Engine Duplex
- Color capability
Full Color
- Printing method
Piezoelectric drop-on-demand inkjet method
- Printing resolution
Image Quality Priority : 1,200 x 1,200 dpi
Speed Priority : 1,200 x 600 dpi- Halftone
3 levels per drop
- Warm-up time*1
15 minutes or less (when the room temperature at 73.4°F (23°C))
- Continuous print speed
Image Quality Priority : 262 ft./min (80 m/min)
Speed Priority : 520ft./min (160 m/min)- Paper size*3
Width 6 - 20.5 in. (152.4 mm - 520.7 mm)
- Paper weight*4
64 to 250 gsm
- Paper feed
Unwinder connected (maximum roll diameter: 50 in. (1,270 mm))
- Paper discharge
Rewinder*5 connected (maximum roll diameter: 50 in. (1,270 mm))
- Feeding speed
Maximum 520 ft./min (160 m/min)
- Operating Noise*6
In operation: 79 dB(A)
- Input power supply
Three-phase AC200 V +/-10 %, 50/60 Hz common, Power Capacity: 87 kVA (Printer)
Three-phase AC400 V +/-10 %, 50/60 Hz common, Power Capacity: 208 kVA (Printer)
Three-phase AC200 V +/-10 %, 50/60 Hz common, Power Capacity: 26 kVA (Paper Stabilizer)
Three-phase AC400 V +/-10 %, 50/60 Hz common, Power Capacity: 104 kVA (Paper Stabilizer)- Dimensions (W X H X D)*7
437 in. x 93.7 in. x 171.5 in. (11,100 mm x 2,380 mm x 4,355 mm) (With rewinder)
406 in. x 93.7 in. x 171.5 in. (10,300 mm x 2,380 mm x 4,355 mm) (With slack web unit. Without rewinder)- Installation space (W X D)*7
594 in. x 248 in. (15,100 mm x 6,300 mm) (With rewinder)
563 in. x 248 in. (14,300 mm x 6,300 mm) (With slack web unit. Without rewinder)- Weight*7
28,890 lbs. (13,105 kg) (With rewinder)
27,680 lbs. (12,555 kg) (With slack web unit. Without rewinder)
- *1 Start-up inspection time and purge time are excluded. It may take more than 15 minutes depending on the installation environment.
- *2 A4 size page x 2 layout and duplex printing. When printing a single document continuously. The continuous print speed may decrease due to conditions such as output data.
- *3 A margin of 0.591 in. (15 mm) on left and right edges of paper is the unprintable area when the Gripper Roller is set on the edge area of the paper.
- *4 It is restricted on printing speed with the paper over 157 gsm.
- *5 Optional.
- *6 Measurement based on the ISO11204 standard.
- *7 Unwinder (standard), rewinder (optional), slack web unit and other necessary units are connected. Excludes roll paper (feed/rewind), attention light and chiller. Includes inks.
Print Server [Print Server for the J Press 1160CFG]
- Type
External
- CPU
[Center Processor] Intel® Xeon® E-2276G Processor 3.8 GHz
[Back End Processor] Intel® Xeon® Gold 6230 Processor 2.1 GHz x 4- Storage device
[Center Processor] HDD: 1 TB x 2 + 2 TB x 1, DVD-ROM drive
[Back End Processor] HDD: 1 TB x 6, SSD: 1.6 TB x 14, 800 GB x 8, DVD-ROM drive- Memory capacity
[Center Processor] 32 GB (Max 32 GB)
[Back End Processor] 384 GB (Max 384 GB)- Server operation system
[Center Processor] Windows Server IoT 2022 Standard
[Back End Processor] Windows Server IoT 2022 Standard- Page description language
Adobe® PostScript® 3TM, PDF/VT-1, PDF/VT-2, PPML
- Print data format
PS, PDF2.0, PDF/X-1a, PDF/X-3, PDF/X-4, PDF/X-5, EPS, TIFF, JPEG
- Interface
Ethernet 1000BASE-T / 100BASE-TX / 10BASE-T
- Network protocol
TCP/IP (lpr, FTP, SMB)
- Input power supply
[Centre Processor] AC100-240V+/-10 %, 50/60 Hz common, Power Capacity: 0.25 kVA
[Back End Processor] AC200-240 V+/-10 %, 50/60 Hz common, Power Capacity: 6.4 kVA (3.2 kVA x 2)- Dimensions (W X H X D)
[Center Processor] 3.86 in. x 13.4 in. x 16 in. (98 mm x 340 mm x 400 mm)
[Back End Processor] 28 in. x 80 in. x 41.3 in. (700 mm x 2,000 mm x 1,050 mm)- Weight
[Center Processor] 24.64 lbs. (11 kg)*8
[Back End Processor] 660 lbs. (300 kg)*9
Note: This Print Server is configured with Center Processor and Back End Processor.
- *8 Excludes monitor, mouse and keyboard.
- *9 Includes console monitor, mouse, keyboard and touch pad.
- To comply with paper weight specifications, it is recommended to use our recommended paper.
Document may not be printed correctly depending on usage conditions. - Functional spare parts will be available for at least 7 years after the product is no longer manufactured.
