The content on this page is intended to healthcare professionals and equivalents.
- Standard Components
FCR PRIMA Tm (Model : CR-IR 392)
- Applicable Console
Console Advance
- Main Connectable Imagers
DRYPIX Smart, DRYPIX EDGE
- Supplies : Imaging Plate
ST-VI (standard type)
35×43 cm (14”×17” ) , 35×35 cm (14”×14” ) , 10”×12” ,
8”×10” , 24×30 cm, 18×24 cm, 15×30 cmHR-VI (high-resolution type)
24×30 cm, 18×24 cm- Supplies : IP Cassette
Type CC
35×43 cm (14”×17” ) , 35×35 cm (14”×14” ) , 10”×12” ,
8”×10” , 24×30 cm, 18×24 cm, 15×30 cmType CH
24×30 cm, 18×24 cmType LC
35.4×124.5 cm, 35.4×101.7 cm, 35.4×83.0 cm,
25.2×58.0 cm, 24.0×57.0 cm- Time Required for IP Feed/Load
Min. 49 sec.
- Processing Capacity
Up to 73 IPs/hr.
- Reading Specification
10 pixels /mm, 5 pixels /mm, 20 pixels /mm
- Time to Start on Display
Min. 33 sec.
- Time to Print on DRYPIX Smart
Approx. 165 sec. (Approx. 155 sec.)*1
in case of 35×43 cm (14”×17”)- Number of Stacker
1
- Network
10 Base T/100 Base TX
- Dimensions (W×D×H)
560×540×392 mm (22”×21”×15”)
- Weight
39 kg (86 lbs.)
- Power Supply Conditions
Single phase 50-60 Hz
AC120-240V ±10% 1.9A (max)- Environmental Conditions
Operating Conditions:
- Temperature: 15-30°C
- Humidity: 15-80%RH (No dew condensation)
- Atmospheric pressure: 750-1060hPa
- *1 In the high speed mode
