Thailand
[photo] INSTAX SQUARE Link smartphone printer in ASH WHITE color

INSTAX SQUARE Link - Specifications

NEW
Front
  1. Film ejection slot
  2. Function button
  3. Power button/LED
  4. USB port cover
  5. USB Type-C port
  6. Reset button*1
Rear
  1. Film door lock
  2. Film door
  • *1 If the printer does not work properly, press the reset button to reset the printer.
Recording method

3-color exposure with OLED

Film used

FUJIFILM instax SQUARE instant film (sold separately)

Number of films

10 films/pack

Image size

62 mm × 62 mm

Exposure pixel count

800 × 800 dots

Exposure resolution

12.5 dots/mm (318 dpi, 80 μm dot pitch)

Exposure gradation

RGB gradation of 256 colors

Interface

Bluetooth Ver. 4.2 (BLE)

Printable image format

JPEG、PNG、HEIF、DNG

Printing time

Image recording - photo output (fed out): Approximately 12 sec.

Possible number of printed images

Approximately 100 (from full charge; number of prints depends on usage conditions)

Power supply

Lithium ion battery (internal type: not removable)

Charging time

Approximately 80 to 120 minutes (depending upon environment temperature at time of charging)

Power consumption

Approximately 3 W

Operating environment

Temperature: +5 ºC to +40 ºC Humidity: 20% to 80% (no condensation)

Main unit dimensions

105 mm × 37.5 mm × 127.5 mm (excluding projecting parts)

Main unit mass Approximately

236 g (excluding film pack)

Supplied accessory

USB cable ( Type-C, Length: 30 cm )

  • * The above specifications are subject to change for performance improvement.
  • * Image size may affect print finish (sharpness, grain, etc.).
  • * Time required for wireless communication may be affected by file size, smartphone model, etc.
  • * Print finish (color, image quality, etc.) may be affected by smartphone model, shooting conditions, etc.
  • * Actual print finish may differ from the image displayed on the LCD screen of your smartphone.