Thailand

instax Link WIDE

NEW
Special Site Support

Front

  1. Film ejection slot
  2. Power button/LED
  3. Strap holes

Bottom

  1. Reset button*1
  2. Micro USB port

Rear

  1. Film door lock
  2. Film door
  • *1 If the printer does not work properly, press the reset button to reset the printer.

Specifications

Recording method

3-color exposure with OLED

Film used

FUJIFILM instax WIDE Instant Film (sold separately)

Number of films

10 films/pack

Image size

62 mm × 99 mm

Supported image size

800 × 1260 dots

Printing resolution

12.5 dots/mm (318 dpi, 80 μm dot pitch)

Printing levels

256 levels per color (RGB)

Interface

Standard compliance: Bluetooth Ver. 4.2 (BLE)

Supported image format

JPEG, PNG, HEIF, DNG

Printing time

Image recording - photo output (fed out): Approximately 12 sec.

Approximate printing capacity

Approximately 100 prints (from full charge)

  • * The number of prints depends on the usage conditions.
Power supply

Lithium ion battery (internal type: not removable)

Charging time

Approximately 80 to 120 minutes (Charging time depends on the temperature and battery remaining level)

Power consumption

Approximately 3 W

Operating environment

Temperature: +5 ºC to +40 ºC Humidity: 20% to 80% (no condensation)

Main unit dimensions

139 mm × 127.5 mm × 33.7 mm (excluding projecting parts)

Main unit mass

Approximately 340 g (excluding film pack)

Supplied accessory

USB cable (BOD700-101, Length: 30 cm) , Stand (1) , Strap (1)

  • Simulated Image. Development time approx. 90 sec.
  • The instax prints depicted are for illustrative purposes only.
  • The above specifications are subject to change for performance improvement.
  • The colors of actual products might differ somewhat from products in the catalog due to the nature of printing.
  • The Bluetooth® wordmark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by FUJIFILM Corporation is under license.
  • The text QR code is a registered trademark and wordmark of Denso Wave Incorporated.
  • The image size may affect sharpness and graininess of the finished print.
  • Depending on the file size and smartphone type, wireless communication may take a long time.
  • The smartphone type and shooting condition may affect the color tone and quality of the finished print.
  • The finished print may look different from the image viewed on the smartphone display.
  • The smartphone screen images are simulated.
  • QR code depicted is for illustrative purposes only.
Special Site
Support