7000 System : Specifications | Fujifilm [Singapore]

The content on this page is intended to healthcare professionals and equivalents.

Processor

VP-7000

Power rating: Voltage
100 to 240 V ± 10 ％
Frequency
50/60 Hz
Current consumption
0.8-0.5Ａ
Dimensions(W×H×D): 390×110×485 mm (incl. projection)
Weight: 9.0 Kg
Observation: Type of color
NTSC/PAL
Digital HDTV
HD-SDI: 2, DVI-D: 2
Analog/Digital HDTV
DVI-I: 1
Analog SDTV
RGB TV: 1, S VIDEO: 1, VIDEO: 1
Screen resolution
SXGA (Default), Full HD
Color adjustment
Brightness, Red, Green, Blue, Red tone, Chroma in nine levels (-4 to +4). Contrast in five levels (-1 to +4).
Contrast
Available in three levels (-1 to +1).
Iris mode
Function to control the screen brightness.
AVE (controls brightness in general), PEAK (controls brightness in highlight areas), AUTO (sets average or peak iris automatically)
Structure emphasis
Function to adjust the sharpness of the subject structure.
Normal mode: Structure Emphasis (SE) 4 level, Detail Hi. (DH) -4 to +4, Detail Lo. (DL) -4 to +4 BLI, BLI-bright or LCI: SE A Mode and B Mode, A Mode 0 to 8, B Mode 0 to 8
Tone
Function to emphasize slight differences between colors by emphasizing the degree of vividness of color. ON/OFF.
Enlargement of the image
Function to enlarge the endoscopic image.
Special light observation mode
BLI, BLI-bright, LCI
FICE
Ten settings available.
Mask types
Type 1, Type 2, Type 2/Dual Mode.
Freeze mode
Function to freeze the endoscopic images.
Peak detection
Function to obtain the highest contrast image.
Shutter speed
Normal 1/60-1/200, High 1/100-1/400, High (zoom scope) 1/100-1/800
Assignment of switches
Scope Switch (1-5), Multi buttons on the front panel （1.2）, Foot Switch （1,2）.^*1
Other functions
Electronic Zoom, PoP Function, Network function, Dual Mode function.
Applicable endoscope: 700/ 600/ 500 series endoscope
Data display: Remote control
Fujifilm specified peripherals can be controled.
Patient information
Patient ID, Patient Name, Sex, Age, Date of Birth, Comments, Hospital name, Doctor name ^*2
Other information
Timer, Laptime
Recording status
Digital printer status, shooting counter, number of recordable images in internal storage device
Image quality setting status
Structure emphasis, Tone, Electronic Zoom Ratio, IEE observation modes, Focus Indicator.
Image recording: Image compression rate
TIFF: no compression, JPEG: approx. 1/5 , 1/10, 1/20　
Number of recordable images in internal storage device
TIFF： 840, JPEG 1/20： 21,690, JPEG 1/10： 16,270, JPEG 1/5： 5,910 ^*3
Recommended external storage device
Swissbit SFU-22048 E1BP2TO-I-MS-111-STD or SFU22048E3BP2TO-I-MS-121-STD^*4
Searching and displaying images
Search screen: Inspection No., Patient ID, Date of Inspection. Display: List, Thumbnail, Enlargement.
Data presetting: Doctors' name
Up to 20 doctors’ names.
Setting by doctor.
The information such as color tone, iris mode, contrast, brightness, special light observation modes are kept by setting the doctor's name.
Clinical procedure
Up to 20 procedures.
Memory backup: When using lithium battery
6 years (based on FUJIFILM criteria)
Control connector: Light source: 1, Remote: 2, Peripherals: 2, Keyboard: 1, Card reader: 1, Digital printer: 1, Footswitch: 1, Network: 1.
Category of medical electric equipment: Type of protection against electric shock
Class I equipment
Degree of protection against electric shock
Type BF applied part
Degree of explosion protection
Prohibited in oxygen-rich environment/ flammable gas atmosphere.

*1 Some limitations by endoscopes.
*2 Max. 45 patients
*3 The number of recordable images varies depending on the type of image.
*4 Concerning other external storage devices, please contact your representative or local dealer.

Product name: : Processor
GMDN: 18034
Generic name: Endoscopic Video image processor

Light source

BL-7000

Power rating: Voltage
100V to 240 V ~ ± 10 ％
Frequency
50/60 Hz
Current consumption
1.2-0.7 A
Dimensions(W×H×D): 390×155×485 mm (incl. projection)
Weight: 12Kg
Illumination: Illumination source
LED, qualifies 300W Xenon lamp intensity
Durability of LED
6 years (based on FUJIFILM criteria)
Lighting system
Switching regulator
Light control method
LED Auto power control
Light cooling method
Forced air cooling
Special light observation mode
BLI, BLI-bright, LCI
Maximum air supply pressure
65 kPa
Automatic brightness adjustment: Automatic brightness adjustment method
Brightness is automatically adjusted according to the video output (manually possible).
Air supply: Pump
Diaphragm method pump
Air supply pump
HI/MID/LOW/OFF
Water supply: Method
Feeds water by pressurizing the detachable water container with air.
Indicators on front panel: Transmitted illumination
The light flashes with the maximum light intensity. Used to check the position of the distal end from outside the body.
Light limitation
To avoid the blood of a bleeding patient becoming clotted by the illuminating light. Used to limit the maximum light intensity.
Illumination mode
OFF/1/2/3. Observation modes can be switched by pressing the illumination mode button.
Memory of set value: Set values are maintained even after turning off the system.
Category of medical electric equipment: Type of protection against electric shock
Class I equipment
Degree of protection against electric shock
Type BF applied part
Degree of explosion protection
Prohibited in oxygen-rich environment/ flammable gas atmosphere.

Product name: Light source
GMDN: 35158
Generic name: Endoscopic light source, line-powered

7000 System - Specifications

Related Products