INSTAX Pal™ Specifications | Fujifilm [Paraguay]

Front

Rear

Side

Specifications

Camera Function

Image sensor: 1/5-inch CMOS with primary color filter
Number of recorded pixels: 2560×1920
Storage media: Internal memory, microSD / microSDHC memory card
Storage capacity: Approximately 50 images in internal memory, approximately 850 images per 1 GB in microSD / microSDHC memory card
Maximum number of shots When the app is not connected: 50 shots
Recording method: DCF compliant Exif Ver 2.3
Focus distance: f=16.25mm (35mm film equivalent)
Aperture: F2.2
Shooting distance: 19.4cm to ∞
Shutter speed: 1/4 second to 1/8000 second (automatic switching)
Shooting sensitivity: ISO100 to 1600 (automatic switching)
Exposure control: Program AE
Exposure compensation: −2.0 EV to +2.0 EV (1/3 EV step)
Metering method: TTL 256 split metering, multi metering
White balance: Auto
Flash: Automatic / OFF / ON
Shooting range with flash : Approximately 60cm to 1.5m
Self-timer: Approximately 2 seconds / approximately 10 seconds
Zoom: Not equipped

Other Function

External interface

USB Type-C port (for charging only)

Power supply

Lithium ion battery (Built-in type)

Charging time

Approximately 2 to 3 hours

Main unit dimensions

42.3mm×44.4mm×43.0mm (excluding projecting parts)

Main unit weight

Approximately 41g

Operating environment

Temperature : 5℃ to 35℃
Humidity : 20% to 80% (no condensation)

Shooting format

INSTAX mini
INSTAX SQUARE
INSTAX WIDE

Number of transfer data pixels

mini : W600 × H800 pixels
SQUARE : W800 × H800 pixels
WIDE : W1260 × H840 pixels

Image transfer time

mini : Approx. 10 sec/shot
SQUARE : Approx. 15 sec/shot
WIDE : Approx. 20 sec/shot

Images of instax printing are for illustrative purposes only.
The above specifications are subject to change for performance improvement.
Image size may affect print finish (sharpness, grain, etc.).
Time required for wireless communication may be affected by file size, smartphone model, etc.
Print finish (color, image quality, etc.) may be affected by smartphone model, shooting conditions, etc.
Actual print finish may differ from the image displayed on the LCD screen of your smartphone.
Smartphone screen images are superimposed.
The Bluetooth® word mark and logo are registered trademarks of Bluetooth SIG, Inc. and FUJIFILM Corporation uses these under license.
QR code is a registered trademark of DENSO WAVE INCORPORATED.

INSTAX PalTM - Specifications