Specifications
*capabilities may vary depending on application
Printing
- Printheads
Fujifilm Dimatix SAMBA™ printheads
- Print width
4.7 inch and 9.4 inch
- Printing Resolution & speed
4.7 inch printbar 1200 x 600 dpi & 1000 fpm 9.4 inch printbar 1200 x 600 dpi & 615 fpm - Image format
IJPDS
Fluids
- Ink
Ink for X-BAR, Powered by Fujifilm Inkjet Technology
- Cleaning and flush fluid
FLXB-101
- Sizes
20L(5.2 US gal), 210L(55.4 US gal) , 1000L (264 US gal)
- Ink supply
Bulk reservoir
Control
- Printbars per system
Up to 16*
*System accommodates a combination of X_BAR printbars and existing Kodak VERSAMARK DS6240, or DS9100/DS9050. Each Fujifilm node can accommodate two legacy imprinting units.- Print verification
Doc Sync
- Print adjustment
Image offset (process and cross-process directions)
- Read & Print
External device interface
Physical
- Printbar
544 x 193 x 188 mm, 17 kg (21.4 x 7.6 x 7.4 inch, 37.5 lbs.)
428 x 417 x 246 mm 25.5 kg (16.8 x 16.4 x 9.7, 56.2 lbs.)
- Fluid station
1027 x 608 x 665 mm, 100 kg (40.4 x 23.9 x 26.2, 220.5 lbs.
- Controller
1150 x 598 x 997, 153 kg (45.3 x 23.5 x 39.2, 337.3 lbs.)
