INSTAX SQUARE Link Specifications | Fujifilm [Philippines]

Front

Rear

*1 If the printer does not work properly, press the reset button to reset the printer.

Recording method: 3-color exposure with OLED
Film used: FUJIFILM instax SQUARE instant film (sold separately)
Number of films: 10 films/pack
Image size: 62 mm × 62 mm
Exposure pixel count: 800 × 800 dots
Exposure resolution: 12.5 dots/mm (318 dpi, 80 μm dot pitch)
Exposure gradation: RGB gradation of 256 colors
Interface: Bluetooth Ver. 4.2 (BLE)
Printable image format: JPEG、PNG、HEIF、DNG
Printing time: Image recording - photo output (fed out): Approximately 12 sec.
Possible number of printed images: Approximately 100 (from full charge; number of prints depends on usage conditions)
Power supply: Lithium ion battery (internal type: not removable)
Charging time: Approximately 80 to 120 minutes (depending upon environment temperature at time of charging)
Power consumption: Approximately 3 W
Operating environment: Temperature: +5 ºC to +40 ºC Humidity: 20% to 80% (no condensation)
Main unit dimensions: 105 mm × 37.5 mm × 127.5 mm (excluding projecting parts)
Main unit mass Approximately: 236 g (excluding film pack)
Supplied accessory: USB cable ( Type-C, Length: 30 cm )

* The above specifications are subject to change for performance improvement.
* Image size may affect print finish (sharpness, grain, etc.).
* Time required for wireless communication may be affected by file size, smartphone model, etc.
* Print finish (color, image quality, etc.) may be affected by smartphone model, shooting conditions, etc.
* Actual print finish may differ from the image displayed on the LCD screen of your smartphone.

INSTAX SQUARE Link - Specifications