SUPERIA Processor | Fujifilm [Philippines]

FCF-V

NEW

The FCF-V Series perfectly complements Fujifilm’s Superia PRO-V low chemistry plate. It is easy to clean and maintain, with an incredibly small footprint, resulting in a simple solution that has clear environmental benefits.

FCF V Series at a glance:

Environmentally friendly and simple processing
Easier maintenance of finishing unit (only one bath)
Less waste produced

Smaller footprint due to a shorter finishing unit
No need for replenishment

	FCF 85V	FCF 125V
Plate types	Superia PRO-V
Maximum plate width	850 mm	1250 mm
Minimum plate length	274 mm	285 mm
Plate gauge	0.15 - 0.3 mm
Processing time	dip to nip, 19 seconds
Tank capacity	23 litres	85 litres
Dimensions (W x D x H)*	1255 x 1300 x (1010 - 1100) mm	1720 x 1660 x (1160 - 1310) mm

FLH-Z

NEW

The award-winning* FLH-Z Series of plate processors is designed for use with Fujifilm's low chemistry range of thermal CTP plates. Each processor in the range incorporates Fujifilm's unique intelligent 'ZAC' microprocessor control system which helps achieve consistent, high quality plate production with minimal chemistry usage and maintenance.

FLH-Z Series at a glance:

Full bath of developer can now develop up to 15,000m2 of plates resulting in substantial savings in developer consumption.
Maintaining perfect developer activity allows the developer bath life to be greatly extended beyond the norm for developing systems.
Typically can achieve bath life figures four or more times greater than normal plate processing systems.

The chemistry used for processing plates in a ‘ZAC’ system is a nonsilicate-based recipe. This makes a much longer bath life possible without the increase in developer sludge and filter blockages.
Because of the way ‘ZAC’ processors intelligently control replenisher delivery, they are more stable making it much easier to achieve high quality, irrespective of changes to environmental conditions.

Key specifications	FLH-Z 85	FLH-Z 125	FLH-Z 150	FLH-Z 165
Plate types Superia	LH-PJE, LH-PLE & LH-PXE thermal plates,and LH-PCE (without ‘ZAC’ benefits)
Maximum plate width	850 mm	1250 mm	1500 mm	1650 mm
Minimum plate length	240 mm	310 mm	310 mm	310 mm
Plate gauge	0.15 – 0.4 mm
Processing time	LH-PJE and LH-PLE: 16 seconds, LH-PXE: 14 seconds
Develop tank capacity	27 litres	76.5 litres	92.5 litres	100 litres
Dimensions (W x D x H)^*	1525 x 1070 x 1085 mm	1950 x 1410 x 1148 mm	2250 x 1410 x 1148 mm	2400 x 1410 x 1148 mm

FLC-V Series

NEW

The Fujifilm FLC-V Series is a range of compact CTP finishing units compatible with Superia PRO-V, Fujifilm’s leading low-chemistry plate. The finishing units are specifically designed to optimise plate production, with minimal environmental impact. Used in conjunction with Superia PRO-V, the FLC-V Series eliminates water rinsing, reduces chemical usage and waste, and improves the overall environmental footprint of plate production.

FLC-V Series at a glance:

Elimination of water rinsing
No chemical replenishment
Simple one bath operation

Low cost of ownership
Small footprint

	FLC-V85M	FLC-V85H	FLC-V125H
Plate types	Superia PRO-V
Maximum plate width	850 mm	850 mm	1250 mm
Minimum plate length	252 mm	290 mm	290 mm
Plate gauge	0.15 - 0.3 mm
Processing time	dip to nip, 19 seconds
Develop tank capacity	35 litres	44 litres	84 litres
Dimensions (W x D x H)^*	1223 x 1295 x 1063 mm	1446 x 1403 x1115 mm	1860 x 1403 x1115 mm

SUPERIA Processor - ＜BLANK＞

Related Products