Ultrasonic Endoscope EG-740UT | Fujifilm [Malaysia]

This webpage content is intended for Healthcare Professionals only, not for general public.

Improved device visualization on the endoscopic image and ultrasound image

endoscopic image

Minimized blind area

As the objective lens is placed behind the elevator, the device can be seen in the endoscopic image.

ultrasound image

Minimized blind area

The position of the working channel outlet relative to the ultrasound transducer, ensures that the blind area between the working channel outlet and ultrasound scanning area is reduced.

Shorter bending radius

The shorter bending radius is designed to improve the access to the anatomical target that is to be assessed and/or treated.

Wide-angle puncture direction supporting wider FNA accessibility

Wide puncture range

The combination of the short bending radius and the improved location of the transducer, enables broad FNA accessibility.

4.0 mm working channel

The large 4.0mm working channel enables the use of various endoscopic devices. It is designed to increase the clearance between the device and the working channel and to reduce the insertion resistance of devices.

High performance transducer technology with Ultra-wide scanning angle

Due to the broader bandwidth and better acoustic sensitivity in combination with an improved signal to noise ratio, a crystal clear ultrasound image can be achieved. Furthermore, the ultra-wide scanning angle is aimed to support diagnostic and therapeutic procedures.

Detachable ultrasonic cable UC-01

The detachable cable design is designed for improved handling, reprocessing and storage of the endoscope

Rinsing port located behind the elevator

Dedicated elevator port enables one way flush for cleaning purposes.

Visualizing balloon channel brushing

For easy cleaning, the distal cleaning brush can be seen exiting the balloon channel.