This webpage content is intended for Healthcare Professionals only, not for general public.
Processor
VP-7000
- Power rating
Voltage
100 to 240 V ± 10 %Frequency
50/60 HzCurrent consumption
0.8-0.5A- Dimensions(W×H×D)
390×110×485 mm (incl. projection)
- Weight
9.0 Kg
- Observation
Type of color
NTSC/PALDigital HDTV
HD-SDI: 2, DVI-D: 2Analog/Digital HDTV
DVI-I: 1Analog SDTV
RGB TV: 1, S VIDEO: 1, VIDEO: 1Screen resolution
SXGA (Default), Full HDColor adjustment
Brightness, Red, Green, Blue, Red tone, Chroma in nine levels (-4 to +4). Contrast in five levels (-1 to +4).Contrast
Available in three levels (-1 to +1).Iris mode
Function to control the screen brightness.
AVE (controls brightness in general), PEAK (controls brightness in highlight areas), AUTO (sets average or peak iris automatically)Structure emphasis
Function to adjust the sharpness of the subject structure.
Normal mode: Structure Emphasis (SE) 4 level, Detail Hi. (DH) -4 to +4, Detail Lo. (DL) -4 to +4 BLI, BLI-bright or LCI: SE A Mode and B Mode, A Mode 0 to 8, B Mode 0 to 8Tone
Function to emphasize slight differences between colors by emphasizing the degree of vividness of color. ON/OFF.Enlargement of the image
Function to enlarge the endoscopic image.Special light observation mode
BLI, BLI-bright, LCIFICE
Ten settings available.Mask types
Type 1, Type 2, Type 2/Dual Mode.Freeze mode
Function to freeze the endoscopic images.Peak detection
Function to obtain the highest contrast image.Shutter speed
Normal 1/60-1/200, High 1/100-1/400, High (zoom scope) 1/100-1/800Assignment of switches
Scope Switch (1-5), Multi buttons on the front panel (1.2), Foot Switch (1,2).*1Other functions
Electronic Zoom, PoP Function, Network function, Dual Mode function.- Applicable endoscope
700/ 600/ 500 series endoscope
- Data display
Remote control
Fujifilm specified peripherals can be controled.Patient information
Patient ID, Patient Name, Sex, Age, Date of Birth, Comments, Hospital name, Doctor name *2Other information
Timer, LaptimeRecording status
Digital printer status, shooting counter, number of recordable images in internal storage deviceImage quality setting status
Structure emphasis, Tone, Electronic Zoom Ratio, IEE observation modes, Focus Indicator.- Image recording
Image compression rate
TIFF: no compression, JPEG: approx. 1/5 , 1/10, 1/20Number of recordable images in internal storage device
TIFF: 840, JPEG 1/20: 21,690, JPEG 1/10: 16,270, JPEG 1/5: 5,910 *3Recommended external storage device
Swissbit SFU-22048 E1BP2TO-I-MS-111-STD or SFU22048E3BP2TO-I-MS-121-STD *4Searching and displaying images
Search screen: Inspection No., Patient ID, Date of Inspection. Display: List, Thumbnail, Enlargement.- Data presetting
Doctors' name
Up to 20 doctors’ names.Setting by doctor.
The information such as color tone, iris mode, contrast, brightness, special light observation modes are kept by setting the doctor's name.Clinical procedure
Up to 20 procedures.- Memory backup
When using lithium battery
6 years (based on FUJIFILM criteria)- Control connector
Light source: 1, Remote: 2, Peripherals: 2, Keyboard: 1, Card reader: 1, Digital printer: 1, Footswitch: 1, Network: 1.
- Category of medical electric equipment
Type of protection against electric shock
Class I equipmentDegree of protection against electric shock
Type BF applied partDegree of explosion protection
Prohibited in oxygen-rich environment/ flammable gas atmosphere.
- *1 Some limitations by endoscopes.
- *2 Max. 45 patients
- *3 The number of recordable images varies depending on the type of image.
- *4 Concerning other external storage devices, please contact your representative or local dealer.
Product name: : Processor
GMDN: 18034
Generic name: Endoscopic Video image processor
Light source
BL-7000
- Power rating
Voltage
100V to 240 V ~ ± 10 %Frequency
50/60 HzCurrent consumption
1.2-0.7 A- Dimensions(W×H×D)
390×155×485 mm (incl. projection)
- Weight
12Kg
- Illumination
Illumination source
LED, qualifies 300W Xenon lamp intensityDurability of LED
6 years (based on FUJIFILM criteria)Lighting system
Switching regulatorLight control method
LED Auto power controlLight cooling method
Forced air coolingSpecial light observation mode
BLI, BLI-bright, LCIMaximum air supply pressure
65 kPa- Automatic brightness adjustment
Automatic brightness adjustment method
Brightness is automatically adjusted according to the video output (manually possible).- Air supply
Pump
Diaphragm method pumpAir supply pump
HI/MID/LOW/OFF- Water supply
Method
Feeds water by pressurizing the detachable water container with air.- Indicators on front panel
Transmitted illumination
The light flashes with the maximum light intensity. Used to check the position of the distal end from outside the body.Light limitation
To avoid the blood of a bleeding patient becoming clotted by the illuminating light. Used to limit the maximum light intensity.Illumination mode
OFF/1/2/3. Observation modes can be switched by pressing the illumination mode button.- Memory of set value
Set values are maintained even after turning off the system.
- Category of medical electric equipment
Type of protection against electric shock
Class I equipmentDegree of protection against electric shock
Type BF applied partDegree of explosion protection
Prohibited in oxygen-rich environment/ flammable gas atmosphere.
- Product name: Light source
- GMDN: 35158
- Generic name: Endoscopic light source, line-powered