7000 System

Voltage
100 to 240 V ± 10 ％

Frequency
50/60 Hz

Current consumption
0.8-0.5Ａ

390×110×485 mm (incl. projection)

9.0 Kg

Type of color
NTSC/PAL

Digital HDTV
HD-SDI: 2, DVI-D: 2

Analog/Digital HDTV
DVI-I: 1

Analog SDTV
RGB TV: 1, S VIDEO: 1, VIDEO: 1

Screen resolution
SXGA (Default), Full HD

Color adjustment
Brightness, Red, Green, Blue, Red tone, Chroma in nine levels (-4 to +4). Contrast in five levels (-1 to +4).

Contrast
Available in three levels (-1 to +1).

Iris mode
Function to control the screen brightness.
AVE (controls brightness in general), PEAK (controls brightness in highlight areas), AUTO (sets average or peak iris automatically)

Structure emphasis
Function to adjust the sharpness of the subject structure.
Normal mode: Structure Emphasis (SE) 4 level, Detail Hi. (DH) -4 to +4, Detail Lo. (DL) -4 to +4 BLI, BLI-bright or LCI: SE A Mode and B Mode, A Mode 0 to 8, B Mode 0 to 8

Tone
Function to emphasize slight differences between colors by emphasizing the degree of vividness of color. ON/OFF.

Enlargement of the image
Function to enlarge the endoscopic image.

Special light observation mode
BLI, BLI-bright, LCI

FICE
Ten settings available.

Mask types
Type 1, Type 2, Type 2/Dual Mode.

Freeze mode
Function to freeze the endoscopic images.

Peak detection
Function to obtain the highest contrast image.

Shutter speed
Normal 1/60-1/200, High 1/100-1/400, High (zoom scope) 1/100-1/800

Assignment of switches
Scope Switch (1-5), Multi buttons on the front panel （1.2）, Foot Switch （1,2）.^*1

Other functions
Electronic Zoom, PoP Function, Network function, Dual Mode function.

700/ 600/ 500 series endoscope

Remote control
Fujifilm specified peripherals can be controled.

Patient information
Patient ID, Patient Name, Sex, Age, Date of Birth, Comments, Hospital name, Doctor name ^*2

Other information
Timer, Laptime

Recording status
Digital printer status, shooting counter, number of recordable images in internal storage device

Image quality setting status
Structure emphasis, Tone, Electronic Zoom Ratio, IEE observation modes, Focus Indicator.

Image compression rate
TIFF: no compression, JPEG: approx. 1/5 , 1/10, 1/20　

Number of recordable images in internal storage device
TIFF： 840, JPEG 1/20： 21,690, JPEG 1/10： 16,270, JPEG 1/5： 5,910 ^*3

Recommended external storage device
Swissbit SFU-22048 E1BP2TO-I-MS-111-STD or SFU22048E3BP2TO-I-MS-121-STD ^*4

Searching and displaying images
Search screen: Inspection No., Patient ID, Date of Inspection. Display: List, Thumbnail, Enlargement.

Doctors' name
Up to 20 doctors’ names.

Setting by doctor.
The information such as color tone, iris mode, contrast, brightness, special light observation modes are kept by setting the doctor's name.

Clinical procedure
Up to 20 procedures.

When using lithium battery
6 years (based on FUJIFILM criteria)

Light source: 1, Remote: 2, Peripherals: 2, Keyboard: 1, Card reader: 1, Digital printer: 1, Footswitch: 1, Network: 1.

Type of protection against electric shock
Class I equipment

Degree of protection against electric shock
Type BF applied part

Degree of explosion protection
Prohibited in oxygen-rich environment/ flammable gas atmosphere.

Voltage
100V to 240 V ~ ± 10 ％

Frequency
50/60 Hz

Current consumption
1.2-0.7 A

390×155×485 mm (incl. projection)

12Kg

Illumination source
LED, qualifies 300W Xenon lamp intensity

Durability of LED
6 years (based on FUJIFILM criteria)

Lighting system
Switching regulator

Light control method
LED Auto power control

Light cooling method
Forced air cooling

Special light observation mode
BLI, BLI-bright, LCI

Maximum air supply pressure
65 kPa

Automatic brightness adjustment method
Brightness is automatically adjusted according to the video output (manually possible).

Pump
Diaphragm method pump

Air supply pump
HI/MID/LOW/OFF

Method
Feeds water by pressurizing the detachable water container with air.

Transmitted illumination
The light flashes with the maximum light intensity. Used to check the position of the distal end from outside the body.

Light limitation
To avoid the blood of a bleeding patient becoming clotted by the illuminating light. Used to limit the maximum light intensity.

Illumination mode
OFF/1/2/3. Observation modes can be switched by pressing the illumination mode button.

Set values are maintained even after turning off the system.

Type of protection against electric shock
Class I equipment

Degree of protection against electric shock
Type BF applied part

Degree of explosion protection
Prohibited in oxygen-rich environment/ flammable gas atmosphere.