- Film ejection slot
- Lens
- Selfie mirror
- (Sound) button
- Shutter button
- Flash/Self timer lamp
- Strap hook
- USB port
- 1 (Shortcut 1) button
- 2 (Shortcut 2) button
- 3 (Shortcut 3) button
- Micro SD card slot
- Reset button
- (Power) button
- Microphone
- Speaker
- Film door lock
- (Playback) button
- (Print) button
- Film door
- LCD monitor
- Cross key
- MENU/OK button
- (Back) button
- Image sensor
1/5-in. CMOS with primary color filter
- Effective pixels
2560 x 1920
- Storage media
Built-in memory, micro SD / micro SDHC memory card (purchased separately)
- Recording capacity
Built-in memory: approx. 45 files, micro SD / micro SDHC memory card: approx. 850 files per 1 gigabyte (without sound)
- File system
Compliant with Design rule for Camera File system (DCF), Exif Ver. 2.3
- Focal length
28 mm (35-mm film equivalent)
- Aperture
F2.0
- Auto focus system
Single AF (equipped with AF auxiliary illuminator)
- Focus range
10 cm to ∞
- Shutter speed
1/4 sec. to 1/8000 sec. (auto)
- Sensitivity
ISO 100 to 1600 (auto)
- Exposure control
Programmed AE
- Exposure compensation
-2.0 EV to +2.0 EV (in increments of 1/3 EV)
- Metering
256-segment through the lens (TTL) metering, multi-metering
- White balance
Auto
- Flash
Auto / Compulsory flash / Suppressed flash
Effective range: approx. 50 cm to 1.5 m- Self timer
Approx. 10 sec. / Approx. 2 sec.
- Image effects
frame and filter
- Voice recording
Recordable and overwritable during image capture and playback per 1 image
- Film
FUJIFILM Instant Film instax mini (purchased separately)
- Photo capacity
10 prints per pack
- Film size
86 mm x 54 mm
- Image size
62 mm x 46 mm
- Supported image size
800 x 600 dots
- Printing solution
12.5 dots per mm (318 dpi, 80-µm dot pitch)
- Printing levels
256 levels per color (RGB)
- Supported image format
JPEG images captured with the device
- Printing time
Approx. 12 sec.
- Print function
Images on built-in memory / micro SD are printable
- Reprint
Reprint up to the last 50 prints
(up to 50 images stored in print history)
- Smartphone app functions
Voice playback from print, smartphone image print, remote image capture, frame addition
- LCD monitor
2.7-in. TFT color LCD monitor, Pixels: approx. 230K dots
- External interface
Micro USB Micro-B (for charging only)
- Power supply
Lithium-ion battery (built-in, cannot be removed)
- Charging function
Built-in
- Printing capacity
Approx. 100 prints (when battery is fully charged)
- * Varies depending on the conditions of use.
- Charging time
Approx. 2 to 3 hrs.
- * Varies depending on air temperature.
- Dimension
82.5 mm x 122.9 mm x 36.7 mm (excluding protrusions)
- Weight
Approx. 225 g (excluding film pack and memory card)
- Operating environment
Temperature: 5℃ to 40℃
Humidity: 20% to 80% (no condensation)
- The instax prints depicted are for illustrative purposes only.
- Specifications above are subject to change for improvement.
- The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG ,Inc. and any use of such marks by FUJIFILM Corporation is under license.
- The QR code listed in this broucher may not be read depending on the smartphone model.
- The text QR code is a registered trademark and wordmark of Denso Wave Incorporated.