instax mini Link 2 Specifications | Fujifilm [South Korea]

*1 If the printer does not work properly, press the reset button to reset the printer.

Recording method: 3-color exposure with OLED
Film used: FUJIFILM INSTAX Mini Instant Film (sold separately)
Image size: 62 mm × 46 mm
Exposure pixel count: 800 × 600 dots
Exposure resolution: 12.5 dots/mm (318 dpi, 80 μm dot pitch)
Exposure gradation: RGB gradation of 256 colors
Interface: Bluetooth Ver. 4.2 (BLE)
Printable image format: JPEG、PNG、HEIF、DNG
Printing time: Image recording - photo output (fed out): Approximately 15 sec.
Possible number of printed images: Approximately 100 (from full charge; number of prints depends on the usage conditions.)
Power supply: Lithium ion battery (internal type: not removable)
Charging time: Approximately 80 to 120 minutes (depending upon environment temperature at time of charging)
Power consumption: Approximately 3 W
Operating environment: Temperature: +5 ºC to +40 ºC
Humidity: 20% to 80% (no condensation)
Main unit dimensions: 91.9 mm × 36.4 mm × 124.8 mm (excluding projecting parts)
Main unit mass: 210 g (excluding film pack)
Supplied accessory: Micro USB cable (BOD700-200, Length: 30 cm)

* Images of instax printing are for illustrative purposes only.
* After an image is shot, it takes a short amount of time to display on the screen.
* The above specifications are subject to change for performance improvement.
* Image size may affect print finish (sharpness, grain, etc.).
* Time required for wireless communication may be affected by file size, smartphone model, etc.
* Print finish (color, image quality, etc.) may be affected by smartphone model, shooting conditions, etc.
* Actual print finish may differ from the image displayed on the LCD screen of your smartphone.
* Smartphone screen images are superimposed.
* The Bluetooth® word mark and logo are registered trademarks of Bluetooth SIG, Inc. and FUJIFILM Corporation uses these under license.
* QR code is a registered trademark of DENSO WAVE INCORPORATED.