- Flash
- Self timer lamp / Charging lamp
- Shutter button
- Selfie mirror
- Lens
- Power switch
- Effect reset button
- Accessory shoe
- Lens dial
- Film dial
- Strap hook
- Tripod hole
- Film ejection slot
- Film door
- Film door lock
- LCD Screen
- Select buttons
- MENU / OK button
- (Back) button
- (Playback) button
- (Function) button
- Print lever
- Image sensor
1/5-inch CMOS with primary color filter
- Number of recorded pixels
2560 x 1920
- Storage media
Internal memory, microSD / microSDHC memory card
- Storage capacity
Approximately 45 images in internal memory, approximately 850 images per 1 GB in microSD / microSDHC memory card
- Recording method
DCF compliant Exif Ver 2.3
- Focus distance
f = 28 mm (35-mm film equivalent)
- Aperture
F2.0
- Auto focus
Single AF (with AF Illuminator)
- Shooting distance
10 cm to ∞
- Shutter speed
1/4 second to 1/8000 second (automatic switching)
- Shooting sensitivity
ISO100 to 1600 (automatic switching)
- Exposure control
Program AE
- Exposure compensation
−2.0 EV to +2.0 EV (1/3 EV step)
- Metering method
TTL 256 split metering, multi metering
- White balance
Auto, Fine, Shade, Fluorescent 1, Fluorescent 2, Fluorescent 3, Incandescent
- Flash
Auto flash / Forced flash / Suppressed flash
Shooting range with flash: Approximately 50 cm to 1.5 m- Self-timer
Approximately 2 seconds / approximately 10 seconds
- Image effects
10 lens effects, 10 film effects
Total of 100 effects by multiplying above
- Exposure pixel count
1600 x 600 dots (800 x 600 dots when printed from smartphone app)
- Exposure resolution
25 dots / mm x 12.5 dots / mm (635 x 318 dpi, 40 x 80 μm dot pitch)
12.5 dots / mm when printed from smartphone app (318 dpi, 80 μm dot pitch)- Interface
Standard compliance: Bluetooth Ver. 4.2 (BLE)
- Exposure gradation
RGB gradation of 256 colors
- Printable image format
JPEG images taken with this unit
- Print output time
Approximately 16 seconds
- * Plus 7 seconds when printed using instax-Rich Mode immediately after startup.
- Print function
Images in the internal memory and images in the memory card can be printed
- Reprint
Reprint is possible for images stored in print history (up to 50)
- Smartphone app linked functions
Smartphone image print function, remote shooting function, printed image transfer function, firmware upgrade function
- LCD screen
3.0-inch TFT color LCD screen
Pixel count: Approximately 460,000 dots- External interface
Micro USB Micro-B (for charging only)
- Power supply
Lithium ion battery (internal type: not removable)
- Charging function
Built-in
- Possible number of printed images
Approximately 100 (from full charge)
- * The number of prints depends on the usage conditions.
- Charging time
Approximately 2 to 3 hours
- * Charging time depends on the temperature.
- Main unit dimensions
87 mm x 122.9 mm x 36 mm (excluding projecting parts)
- Main unit weight
Approximately 285 g
- Operating environment
Temperature: 5ºC to 40ºC
Humidity: 20% to 80% (no condensation)- Film used
FUJIFILM instant film "instax mini" (sold separately)
- Specifications above are subject to change for improvement.
- The Bluetooth® wordmark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by FUJIFILM Corporation is under license.