IX-Film - Overview

• Micro-electronic parts
• Neutron radiography
• Critical investment castings
• Ultra-fine ceramic parts
• Graphite composite parts

A single emulsion, ultra-fine grain, high contrast film suitable for critical inspections that require high image quality. Its single emulsion feature minimizes parallax and permits extremely sharp magnified image.IX20 is generally used in direct exposure techniques or with lead screens.

• Micro-electronic parts
• Fine ceramic parts
• Castings: low to medium atomic number metals
• Carbon fiber reinforced plastics

Fujifilm's finest grain, highest contrast ASTM special film having maximum sharpness and discrimination characteristics.
IX25 is generally used in direct exposure techniques or with lead screens.
IX25 is recommended for automatic processing only.

• Pipe weld
• Electronic components
• Aerospace and aircraft components
• Nuclear plants
• Castings(low to medium atomic number metals)

An ultra-fine grain, very high contrast ASTM Class Ⅰ film having excellent sharpness and very high discrimination characteristics. IX30 will provide an excellent image quality to obtain accurate results for critical NDT inspections.
IX30 is suitable for exposure using radiation sources such as X-ray, gamma rays or megavolt equipment. IX30 is generally used in direct exposure techniques or with lead screens.

• Electronic parts
• Graphite epoxy composites
• Castings: low to medium atomic number metals

An ultra-fine grain, high contrast ASTM Class Ⅰ film having excellent sharpness and high discrimination characteristics. It is suitable for use with any low atomic number material where fine image detail is imperative. IX50 is generally used in direct exposure techniques or with lead screens.

• Welds: low to medium atomic number metals
• Castings: low to medium atomic number metals
• Aircraft construction and maintenance
• Graphite epoxy composites

An extremely fine grain, high contrast ASTM Class Ⅰ film suitable for detection of minute defects. It is applicable to the inspection of low atomic number materials with low kilovoltage X-ray sources, as well as inspection of higher atomic number materials with high kilovoltage X-ray or gamma ray sources. IX80 is generally used in direct exposure techniques or with lead screens.

• Welds: medium to higher atomic number metals
• Castings: medium to higher atomic number metals
• Aircraft construction and maintenance

A very fine grain, high contrast ASTM Class II film suitable for the inspection of light metals with low activity radiation sources, and also for inspection of thick objects with high kilovoltage X-ray or gamma ray sources. Wide exposure latitude has been demonstrated in high contrast subject applications. IX100 is generally used in direct exposure techniques or with lead screens.

• Heavy, multi-thick steel parts
• Steel reinforced concrete
• Low curie isotope and low-output X-ray exposures

A high speed, fine grain, high contrast ASTM Class III film suitable for inspection of a large variety of objects with low-to-high kilovoltage X-ray and gamma ray sources. It is particularly useful when gamma ray sources of high activity are unavailable or when very thick specimens are to be inspected. IX150 is used in direct exposure techniques or with lead screens.

• Castings and other multi-thickness objects

An ultra-fine grain, medium contrast ASTM Class W-A film suitable to inspect wide range thickness objects such as precision cast parts with X-ray or gamma ray sources.
IX29 can be used in direct exposure techniques or with lead screens.

• Castings and other multi-thickness objects

An extremely fine grain, medium contrast ASTM Class W-B film suitable to inspect multi-thick, low-atomic number metal, and steel cast parts. IX59 can be used in direct exposure techniques or with lead screens.

• Aerospace components
• Weldings (low to medium atomic number metals)
• Castings (low to medium atomic number metals)
• Electronic components

Ultra fine grain film with very high contrast and medium speed

• Weldings (low to medium atomic number metals)
• Castings (low to medium atomic number metals)
• Aerospace components

Very fine grain film with very high contrast and medium speed

• Weldings (medium to higher atomic number metals)
• Castings (medium to higher atomic number metals)
• Aerospace components

Fine grain film with high contrast and high speed

Calibrated to NIST with conformance certificate. To be used for ASME Section V Article 2 Paragraph T 262 and ASTM E-1079 densitometer calibration.

To be used in accordance with ASTM E999 and ISO11699-2(EN584-2) standards to control the quality of the processing system.