instax mini LiPlay Specifications | Fujifilm [Indonesia]

Front

Side

Rear

Camera Specifications

Image sensor: 1/5-in. CMOS with primary color filter
Effective pixels: 2560 x 1920
Storage media: Built-in memory, micro SD / micro SDHC memory card (purchased separately)
Recording capacity: Built-in memory: approx. 45 files, micro SD / micro SDHC memory card: approx. 850 files per 1 gigabyte (without sound)
File system: Compliant with Design rule for Camera File system (DCF), Exif Ver. 2.3
Focal length: 28 mm (35-mm film equivalent)
Aperture: F2.0
Auto focus system: Single AF (equipped with AF auxiliary illuminator)
Focus range: 10 cm to ∞
Shutter speed: 1/4 sec. to 1/8000 sec. (auto)
Sensitivity: ISO 100 to 1600 (auto)
Exposure control: Programmed AE
Exposure compensation: -2.0 EV to +2.0 EV (in increments of 1/3 EV)
Metering: 256-segment through the lens (TTL) metering, multi-metering
White balance: Auto
Flash: Auto / Compulsory flash / Suppressed flash
Effective range: approx. 50 cm to 1.5 m
Self timer: Approx. 10 sec. / Approx. 2 sec.
Image effects: frame and filter
Voice recording: Recordable and overwritable during image capture and playback per 1 image

Printer Specifications

Film: FUJIFILM Instant Film instax mini (purchased separately)
Photo capacity: 10 prints per pack
Film size: 86 mm x 54 mm
Image size: 62 mm x 46 mm
Supported image size: 800 x 600 dots
Printing solution: 12.5 dots per mm (318 dpi, 80-µm dot pitch)
Printing levels: 256 levels per color (RGB)
Supported image format: JPEG images captured with the device
Printing time: Approx. 12 sec.
Print function: Images on built-in memory / micro SD are printable
Reprint: Reprint up to the last 50 prints
(up to 50 images stored in print history)

Other Specifications

Smartphone app functions

Voice playback from print, smartphone image print, remote image capture, frame addition

LCD monitor

2.7-in. TFT color LCD monitor, Pixels: approx. 230K dots

External interface

USB Type-C (for charging only)

Power supply

Lithium-ion battery (built-in, cannot be removed)

Charging function

Built-in

Printing capacity

Approx. 100 prints (when battery is fully charged)

Charging time

Approx. 2 to 3 hrs.

Dimension

82.5 mm x 122.9 mm x 36.7 mm (excluding protrusions)

Weight

Approx. 225 g (excluding film pack and memory card)

Operating environment

Temperature: 5℃ to 40℃
Humidity: 20% to 80% (no condensation)

The instax prints depicted are for illustrative purposes only.
Specifications above are subject to change for improvement.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG ,Inc. and any use of such marks by FUJIFILM Corporation is under license.
The QR code listed in this broucher may not be read depending on the smartphone model.
The text QR code is a registered trademark and wordmark of Denso Wave Incorporated.

instax mini LiPlay - Specifications