ApeosPort-VI C5571 R / C3371 R

• * ApeosPort-VI C5571 R, by weight.

Our history of resource recycling

At FUJIFILM Business Innovation, we established our company-wide recycling policy known as Infinite "Zero Landfill" in 1995, designed as a closed-loop system under which we have been collecting products used by customers for recycling and reuse.
In 1998, we began to use recycled plastic (ABS resin) made from our products that we collected, which was an industry first. In 2008, we established a site for reuse and recycling in Suzhou, China, expanding our activities.

Closed-loop system

FUJIFILM Business Innovation has built a circular production system by examining the entire product lifecycle, from the product planning, development, and manufacturing stages to disposal.

Remanufactured Product

"Remanufactured Product" is our term for a resource-recycling product in line with our philosophy that used products should be treated as valuable resources rather than waste.
We guarantee the quality and reliability of used products collected from customers that are deemed to be in acceptable condition for reuse. As part of the transition towards decarbonisation, we are actively embracing the reuse of parts with minor discoloration and scratches, provided that they satisfy the relevant performance and safety requirements.

• Note: Interior or exterior colours may differ from those shown in the catalogue due to the use of used parts.

Significantly reducing environmental impact

• A parts reuse rate of up to 84%^*1 (by weight)
• The CO₂ emissions from the entire product lifecycle, including manufacturing, transportation and customer use, were reduced by up to 37%^*2

• *1: ApeosPort-VI C5571 R
• *2: Based on ApeosPort-VI C5571 R, with new product ApeosPort-VI C5571 representing 100%.

Induction heating (IH) fusing technology

Conventional fusing devices are permanently kept in a pre-heated state so that they can be used from the standby state, which naturally requires considerable power. FUJIFILM Business Innovation developed IH fusing technologies that enable quick heating to eliminate the necessity of preheating in standby or power-saving mode to conserve energy and increase convenience.

High speed recovery from sleep mode with an instant heating IH-Fuser

The instant heating IH-Fuser takes no more than five seconds to reach full heat from low-power sleep mode, thus helping to reduce overall power consumption without compromising user convenience.

LED print head technology

A light source consisting of small light-emitting diodes (LEDs) arranged in large numbers is employed as a print head that writes images on photoreceptors. By concentrating light uniformly compared to laser raster output scanners (ROS), it achieves high image quality at 1,200 dpi x 2,400 dpi. At the same time, 57%^* lower power consumption, a space saving design, and a quiet environment not generating motor noises are achieved.

• * When comparing ApeosPort-VI C3371 R to the conventional product in the same class released prior to adoption of this technology.

Smart power saving technology

The technology performs a detailed control of electrification to only power the required parts of the MFP according to the functions being used to conserve energy and increase convenience.

Super EA-Eco toner

Super EA-Eco toner achieves low-temperature fusing performance boasting a melt temperature around 10℃ lower than that of EA-Eco toner. This results in lower power consumption.

Smart WelcomEyes technology

The Smart WelcomEyes technology automatically wakes the MFP from sleep mode when it detects movement nearby. This clever power-saving feature is designed to accommodate a trend toward opting for longer sleep transition times.

High image quality with sharp images

[ Toner with small grain size ]

Super EA-Eco toner adopted. It produces clear and sharp text and lines with smooth gradations. Half-tones are also beautifully reproduced to allow smooth printing such as the softness of a baby's skin and natural gradations of a blue sky.

[ Motivating in-house printing ]

In addition to high image quality, the devices provide easy-to-use image quality adjustments^* that catch the heart of those users who are keen for higher quality. This MFP will be perfect even for in-house printing of printed materials that need that extra appeal together with higher speeds and lower costs.

• * Adjust Paper Registration, Density Uniformity Adjustment, Print Head Alignment, Adjust Image Transfer.

Highly efficient with waste-free operations

[ Automatic recovery from sleep mode ]

A camera installed in the MFPs detects the user and the device automatically recovers from the sleep mode. Even if the device is always set to sleep mode, which offers excellent energy saving performance, it can be used immediately without compromising user convenience.

[ Multiple device configuration ]

Selectable from MFP with output speed of 35 ppm and 55 ppm. By adopting multiple devices, the optimal placement based on usage together with standardized operations and configuration methods can all be achieved.

Highly productive with convenience

[ High-speed scanning in large quantities ]

Devices are equipped with a duplex automatic document feeder that can scan both sides of a document at once. It achieves high-speed scanning of 154 pages per minute. Up to 130 sheets can be loaded.

[ Automation of a series of processes, including Z-folding ]

Various finishing options are available. When outputting A4 documents that include several A3 drawings, the A3 sheets can be Z-folded, the whole bundle stapled and hole-punched to create an A4 file.

• Note: Optional.

Highly versatile for more variation

[ Thin and heavyweight paper all supported ]

The standard tray can handle paper between 52 to 300 gsm. In addition to printing envelopes, this MFP can satisfy your needs for printing sales promotion materials such as POP and packaging in small lots.

Print from any MFP

Even if the MFP that you chose to print out is in use, you can print from another MFP on the network. The document is stored in the MFP and users can check jobs or change print settings such as the number of outputs before they print the document. This can prevent wasteful printing while also ensuring security.

• Note: Requires optional Server-less On-Demand Print.

Authentication from any MFP

User authentication information can be shared between several MFPs in a server-less environment, allowing for authentication from any MFP. This helps save on costs, as there is no need for a dedicated server to link the MFPs.

• Note: Requires optional Server-less Authentication.

Smoothly scanning for personal usage

Scan both single-sided and double-sided documents in any orientation with ScanAuto. Previously used recipient e-mail addresses appear in the user history for easy selection, and the sender's e-mail address is pre-filled automatically when in authentication.

Scanning and saving for each task made easy

Regular or repetitive scanning tasks can be performed quickly and easily thanks to the automated workflow. Simply select a document type and the software will convert the scan data into document form, create a file name according to the specified naming rules and then save the document to the specified location.

• Note: Requires optional Scan Delivery.

Flexible office layout options

Fully compatible with wireless LAN, plus support for Print Utility, AirPrint and Mopria Print Service. No cabling means greater flexibility to accommodate any office layout, including hot-desking setups. And with Wi-Fi Direct, visitors can print directly from mobile devices without going through the office intranet.

• Note: Requires optional Wireless LAN Kit.

Print Utility

Print photos and DocuWorks/PDF documents directly from your mobile device. Save Scanned documents from an MFP to a photo album on your phone or tablet, or send by e-mail. Share paper-based documents and materials instantly with others.

Versatile fax functionality (Optional)

[ Supports high-volume transmissions ]

Support for multiple fax transmissions on up to three lines^* which saves space and reduces costs.

• * Requires optional Fax Extension Board 3 / Additional G3 Port 3.

[ Reduces paper wastage ]

Received faxes are saved in internal memory, and can be previewed on the control panel before printing.

[ Check your faxes remotely ]

Received faxes can be forwarded on via e-mail or uploaded to the Working Folder cloud service, then accessed remotely from your smartphone or mobile computer.

[ Send directly from your computer ]

Send faxes straight from your computer. No need to print documents out first.

[ Fax control ]

Block inbound faxes from unwanted and unknown fax numbers.

[ Automatic sorting ]

Received faxes can be sorted by sender ID or date, then forwarded on to a particular server or shared folder, or sent via e-mail.

• Note: Requires optional Paperless Fax Delivery.

[ One-touch buttons ]

The one-touch buttons can store up to 70 frequently used destinations of Fax, E-mail and Scan to PC.

More secure and convenient authentication features

Authentication settings prevent unauthorized access to or operation of MFPs. Individual user histories can be generated from job records. Authentication of users registered to an MFP as well as LDAP servers can be linked to IC cards.^*

• * Requires optional IC Card Reader.

Delete stored data from hard disk

Data stored on the hard disk is encrypted and overwritten to minimise the risk of information security breaches. Batch delete can also be used to prevent unauthorized third-party access to copy and print data on the hard disk, for example in the event that the MFP is transported outside of the premises.

More security, less wastage

Print jobs can be saved in the hard disk, requiring authentication for subsequent access to print. This helps to prevent issues with unintended or uncollected print jobs. Print settings such as number of copies and single/double sided can be modified for stored print jobs, which helps to prevent errors and reduce wastage and TCO.

Secure use of one device by two departments

An optional Secondary Ethernet can be added. It allows the print duties of an MFP to be split between office documents and the mission-critical system, for example. This saves time and space, while providing optimum security thanks to the fully independent network ports.

• Note: Requires optional Secondary Ethernet Kit.

Share information anytime, anywhere

With Working Folder and internet access, documents can be viewed regardless of time and location.

• Can be linked smoothly with multifunction printers, DocuWorks, and mobile devices
• Documents in Working Folder can be printed from the control panel
• Scanned documents will be assigned a file name and stored in Working Folder. An email notification will be sent to relevant users

Easy and secure output even when you are working remotely

With Cloud On-Demand Print, you can register documents from a PC or mobile device to the cloud server and print them from the designated multifunction printers.

• Can be operated securely using a User ID and password
• Fear of loss or stolen data is minimised
• No dedicated driver is required

Centralized via the cloud

Cloud Service Hub provides single sign-on access to a range of cloud storage services.

• Save scanned documents from an MFP directly to a designated location
• Search multiple cloud services simultaneously and print
• Apply OCR to scanned documents to enable searching

• Note: Compatible with Working Folder, OneDrive, Evernote^®, SharePoint Online, Box^®, Google Drive^TM and Dropbox^®. Third-party cloud service providers may require payment.

Totalize multiple devices in different locations easily

Device Log Service allows you to totalize operational data for multiple devices across different locations.

• Display operational data in table or graph form
• Cost awareness in the office can be achieved while minimising administrator workload. It promotes TCO reduction

Cloud ready

Preinstalled with an application for directly accessing Cloud services for printing and scanning. If your office is already using Cloud services, the services can be used immediately after the MFP is installed.

• * Options must be purchased and installed together with remanufactured Fuji Xerox brand model. Options cannot be purchased or installed at a later date.