Optional Accessories
Head Mount
The Mini 4300 Head Mount is designed to provide an integration solution between the printbar and a transport system, while providing 5 axes of adjustment for high image quality results.
- Material
Stainless steel, aluminum
- Weight
Approximately 11 kg [25 lbs.]
- Mounting holes
M8 x 1.25 thread, 25.4 x 25.4 square hole pattern
- Yaw adjustment
± 3 degrees
- Roll adjustment
± 2.5 degrees
- Pitch adjustment
± 2 degrees
- Standoff adjustment
19 mm [0.75 in.]
- Horizontal coarse adjustment
320 mm [12.6 in.] max
- Horizontal fine adjustment
9 mm [ 0.35 in.]
LED Lamp
The LED lamp is used for UV/LED curable inks. Results may vary.
- Size
77 x 90 x 231.3 mm [3 x 3.5 x 9 in.]
- Weight
1.82 kg [2.2 lbs.]
- Standoff distance
2 mm [0.08 in.]
- Noise
54dbA @ 1 m [3.3 ft.]
- Max operating temp
35°C [ 95°F]
- Input power
120V
- Input signal
Analogue or RS485
Aqueous Dryer
The Aqueous dryer is used for aqueous inks, organic solvents and latex. Results may vary.
- Lamp size
362/508 x 22/67 x 237 mm [14.2/20 x 0.9/2.6 x 9.3 in.]
- Drying width
44 mm [1.7 in.]
- Lamp weight
1.7 kg [3.7 lbs.]
- Lamp power
Up to 3.1kW emitter
- PSU input power
230VAC, 14A, 50/60 Hz*
- PSU weight
2 kg [4.4 lbs.]
- PSU size
128 x 250 x 60 mm [5 x 9.8 x 2.4 in.]
- Mount height adjustment
60 mm [2.4 in.]
- Mount flip-up angle
45° and 90°
- Mounting holes
M8, 100 mm [3.9 in.] width
The Roll-to-roll Rewinder is a tabletop unit designed to support single pass inkjet technology.
- Size
1092.2 x 457.2 x 508 mm [43 x 18 x 20 in.]
- Weight
113.4 KG [250 lbs.]
- Max substrate roll diameter
304.8 mm [12 in.]
- Max substrate roll width
152.4 mm [6 in.]
- Substrate roll core diameter
76.2 mm [3 in.]
- Core locking
Manual
- Speed
10.7 – 152.4 meters per minute [35 – 500 feet per minute]
- Unit control
Manual through local HMI touch screen
- Auto tension control
Yes
- Tension control method
Pneumatic brake
- Substrate break detection
Yes
- End of substrate notification
Yes
- E-stop
Yes
- Encoder mounting bracket
Yes
- Mounting plate
M8 x 1.25 thread, 25.4 x 25.4 mm square pattern
- Substrate elevation
Even with top mounting plate
- Input power
230 VAC, Single phase, 50/60 Hz
