INSTAX SQUARE® SQ20：Specifications

SPECIFICATIONS

Front

Flash/Self timer lamp
Strap hook
Shutter button (Right)
Zoom ring
Lens
Film ejection slot
Strap hook
Shutter button (Left)
Selfie mirror
Card slot cover
USB port
Reset button
Micro SD card slot

Rear

Power switch (Still picture/Movie)
(Filter) button
Selector button/Command dial
(Vignette) button
(Playback) button
(Back) button
Film door lock
LCD Monitor
Film door
(Brightness) button
MENU/OK button
(Print) button

Camera

Image sensor: 1/5-in., CMOS with primary color filter
Effective pixels: 1920 x 1920
Storage media: Built-in memory, microSD/microSDHC memory card
Recording capacity (still picture): Built-in memory:Approx. 50 files (still picture), Approx. 30 seconds (movie) microSD/microSDHC memory card:Approx. 1000 files per 1 gigabyte
Recording capacity (movie): microSD/microSDHC memory card: Approx. 3 minutes (total) per 1 gigabyte
File system: Still picture: Compliant with Design Rule for Camera File System (DCF), Exif Ver.2.3, Compliant with JPEG and PIM
Movie: 800 x 800 x 15 fps, H.264 (No sound can be recorded.)
Focal length: Fixed as 33.4 mm (35-mm format equivalent)
Aperture: F2.4
Auto focus system: Single AF (Contrast-detect TTL, equipped with AF illuminator)
Continuous AF (Only for movie shooting)
Focus range: 10cm/3.9 in. to ∞
Shutter speed: 1/7500 sec. to 1/2 sec. (Auto), maximum 10 sec. in Bulb mode
Sensitivity: ISO 100 to 1600 (Auto)
Exposure control: Programmed AE
Exposure compensation: -2.0 EV to +2.0 EV in increments of 1/3 EV
Metering: 256-segment through the lens (TTL) metering, Multi metering
White balance: Auto
Flash: Auto / Compulsory flash / Suppressed flash
Effective range: Approx. 50 cm to 2 m/1.6 ft. to 6.6 ft.
Shooting mode: Standard, Double exposure, Bulb mode, Split, Collage, Time Shift Collage
Self-timer: Approx. 10 sec./Approx. 2 sec.
Image effect: 21 Filters (18 for still picture, 3 for movie shooting only), Brightness adjustment, Vignette
Playback function: Trimming, Multi image playback

Printer

Film: FUJIFILM Instant Film “INSTAX SQUARE” (Purchased separately)
Photo capacity: 10 prints/pack
Film size: 86 mm x 72 mm/3.4 in. x 2.8 in.
Image size: 62 mm x 62 mm/2.4 in. x 2.4 in.
Supported image size: 800 x 800 dots
Printing solution: 12.5 dots/mm (318 dpi, 80 μm dot pitch)
Printing levels: 256 levels per color (RGB)
Supported image format: JPEG (Some images saved with a photo editing/processing software may not be displayed or printed.) JPEG files captured from a movie file can be printed.
Printing time: Approx. 12 seconds
Print timing: Printing shortly after shooting/Printing after selecting image
Printing function: Images on built-in memory/micro SD card
Reprint: Printable up to the past 50 prints
(Up to 50 images stored in print history)
Digital zoom: Up to 4 X in shooting/printing

Others

LCD monitor

2.7-in. (6.9 cm) TFT color LCD monitor,
Pixels: Approx. 230k-dots

External interface

Micro USB Micro-B (For charging/file copying)

Power supply

Li-ion battery (Built-in, Cannot be removed.)

Charging function

Built-in

Printing capacity

Approx. 100 prints (From when the battery is charged fully)

* Varies depending on the conditions of use.

Charging time

Approx. 2 to 3 hours (Using 0.5 A USB port)

* Varies depending on air temperature.

Dimension

119 mm x 50 mm x 127 mm/4.7 in. x 2 in. x 5 in. (W x D x H)

Weight

390 g/13.8 oz. (excluding film pack and memory card)
440 g/15.5 oz. (including film pack and memory card)

Operating environment

Temperature: 5 °C (41 °F) to 40 °C (104 °F)
Humidity: 20% to 80% (no condensation)

Specifications above are subject to change for improvement.

INSTAXSQUARE^® SQ20 - Specifications

News

INSTAX SQUARE® SQ20 - Specifications

INSTAXSQUARE^® SQ20 - Specifications