SLV series UV flexo inks are designed for use with a broad range of paper and film substrates including all shrink substrates (PET/G, PVC, Polystyrenes, PLA and others). Fujifilm SLV inks offer superb dot reproduction, maintain crisp print definition, sharp copy and clean reverses without the gain typical of water or solvent based flexo inks.
- Ultra low viscosity
- Fast cure
- High color density
- Superb dot reproduction
- Suitable for use on multiple substrates, including PETG, PVC & PLA
- Excellent intercoat adhesion
- High gloss finish
- Hi slip for bottle application
- Low odor
- High abrasion resistance
- No foaming on press applications
PDF: 319KB
PDF: 284KB
Fujifilm 800 Series UV Flexo inks offer superb dot reproduction, maintain crisp print definition and sharp copy and clean reverses without the gain typical of water or solvent based flexo inks. Fujifilm 800 Series have good flow, and leveling properties and a high gloss level. Intercoat adhesion and trapping is particularly good, and can be printed over or under other UV inks. 800 Series also provides excellent performance on absorbent paper substrates.
- Ultra low viscosity range: 700-900 cP
- High color density
- Superb dot reproduction
- Excellent intercoat adhesion and trapping
- High gloss finish
- No foaming on press
- Lightfast colors available for outdoor application
PDF: 289KB
PDF: 351KB
PDF: 270KB
Fujifilm Supernova White has been engineered to be the only white needed for non-shrink flexo applications. The advanced design enables the extreme opacity and smooth laydown of a rotary screen white running at flexo speeds. This not only allows for much faster speeds than rotary screen printing but eliminates the cost and setup time of rotary screen. SuperNova White also prints exceptional detail when used with fine line anilox volumes allowing it to be a one-ink for all flexo applications.
- Very high opacity UV flexo white
- Smooth laydown with no pinholing
- Very broad adhesion range
- Fast curing
- Very fine detail capability
PDF: 2.8MB
PDF: 322KB
PDF: 287KB
Fujifilm 820 Series UV Flexo inks offer superb dot reproduction, maintain crisp print definition and sharp copy and clean reverses without the gain typical of water or solvent based flexo inks. 820 Series inks have good flow, and leveling properties and a high gloss level. Intercoat adhesion and trapping is particularly good, and can be printed over or under other UV inks.
- Moderate viscosity range: 1000-1500 cP
- High color density
- Superb dot reproduction
- Excellent intercoat adhesion and trapping
- Inkjet and laser receptive
- High gloss finish
- No foaming on press
PDF: 279KB
PDF: 258KB
Fujifilm 850 Series UV Flexo inks are designed for use with multiple substrates, including PET, PVC, and others. Fujifilm 850 inks offer superb dot reproduction, maintain crisp print definition, sharp copy and clean reverses without the gain typical of water or solvent based flexo inks.
- Ultra low viscosity range: 600-1000 cP
- High color density
- Superb dot reproduction
- Suitable for use on multiple substrates, including PET & PVC
- Excellent intercoat adhesion and trapping
- High gloss finish
- No foaming on press
PDF: 321KB
PDF: 286KB
The Fujifilm 800 Series Varnish line consists of many different clears designed for different applications and demands. The line includes a high gloss, scuff resistant, super scuff resistant and imprintable varnishes, many with optical brightner options. The 800-MVP is a unique formulation that does not “body up” in the pan as most matte varnishes do.
- 800-HGV2 Hi-gloss Clear
- 800-SRV2 Scuff Resistant Clear
- 800-MVP Matte Clear
- 800-MDC Super Scuff Resistant Clear
- 800-IV Imprintable Varnish
- 800S29977 High Gloss with no Optical Brightener
PDF: 319KB