FUJIFILM

Verification of Healthcare Professionals

Thank you for visiting Fujifilm website.

The content on this page is intended for healthcare professionals or equivalent.
Please confirm that you are a healthcare professional.

You are accessing from the United States. To browse Fujifilm USA website, please click the following link.

Fujifilm USA Website

FCR PRIMA T - Specifications

A table-top reader unit with speedy processing and high resolution.

Overview

The content on this page is intended to healthcare professionals and equivalents.

Standard Components

FCR PRIMA T Image Reader (Model: CR-IR 392)

AC power cord

Other System Components

Imaging Plate ST-VI:
35×43cm (14”×17”), 35×35cm (14”×14”), 10”×12”, 8”×10”, 24×30cm, 18×24cm, 15×30cm (Variation)

IP Cassette Type CC:
35×43cm (14”×17”), 35×35cm (14”×14”), 10”×12”, 8”×10”, 24×30cm, 18×24cm, 15×30cm (Variation)

Time Required for IP Feed/Load

Min. 64 sec. (Min. 54 sec.)*1

Processing Capacity

Up to 57 IPs/ hr. (Up to 67 IPs/hr.)*1

Reading Specification

10 pixels /mm, 5 pixels/mm*2

Time to Start on Display

Min. 33 sec.

Time to Print on DRYPIX PRIMA

Approx. 165 sec. (Approx. 155 sec.)*2 in case of 35×43cm

Number of Stacker

1

Network

10 Base T/100 Base TX

Dimensions (W×D×H)

560×540×392mm (22”×21”×15”)

Weight

39kg (86lbs.)

Power Supply Conditions

Single phase 50-60Hz

AC120-240V ±10% 1.9A (max)

Environmental Conditions

Operating Conditions:

  • Temperature: 15-30C
  • Humidity: 15-80%RH (No dew condensation)
  • Atmospheric pressure: 750-1060hPa

This equipment is a Class 1 laser product (IEC60825).

  • *1 When using the Upgrade Kit
  • *2 When using the Upgrade Kit and in the High Speed mode
  • * Fujifilm makes no representation that products on this website are commercially available in all countries.
  • * Approved uses of products vary by country and region.
  • * Specifications and appearance of products are subject to change without notice.